Re: Need help with parallel port input design
Posted by
grantfair2001
on 2003-09-15 23:23:38 UTC
Thanks Lloyd. I guess I need to understand when it is ok, or
necessary, to use a pullup resistor in relation to the parallel port.
As I understand it, if the parallel output port lines are configured
as open collector, they are necessary. But there is no way to know
what this configuration is, right? Well, I am confused.
Grant
necessary, to use a pullup resistor in relation to the parallel port.
As I understand it, if the parallel output port lines are configured
as open collector, they are necessary. But there is no way to know
what this configuration is, right? Well, I am confused.
Grant
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Lloyd Leung" <lloyd@l...> wrote:
> Dean uses just an hex inverter... the IC itself is CD4069UBCN.
>
> I believe it's only for driving only 5 inputs. Pins 10-15. So only
5 of
> the 6 inverter circuits are being used.
>
>
Discussion Thread
washcomp
2003-09-15 13:49:59 UTC
Need help with parallel port input design
Lloyd Leung
2003-09-15 14:10:27 UTC
RE: Need help with parallel port input design
washcomp
2003-09-15 15:29:25 UTC
Re: Need help with parallel port input design
washcomp
2003-09-15 15:45:38 UTC
Re: Need help with parallel port input design-follow up question
Damon
2003-09-15 18:33:31 UTC
Re: Need help with parallel port input design-follow up question
grantfair2001
2003-09-15 19:17:55 UTC
Re: Need help with parallel port input design
Lloyd Leung
2003-09-15 21:05:04 UTC
RE: Need help with parallel port input design
grantfair2001
2003-09-15 23:23:38 UTC
Re: Need help with parallel port input design
Lloyd Leung
2003-09-16 05:55:43 UTC
RE: Need help with parallel port input design-follow up question