Re: [CAD_CAM_EDM_DRO] Powersupply

I have some pieces that you might be interested. $60 plus shipping

44VCT toroidal transformer - 250va
(2 x 22V secondaries at 120V input)
56,000uf 63v Capacitor with hold down clamp
Bridge Rectifier

Combined components will result in a 60vdc 5A power supply

http://66.12.111.114/bay/CNC/Power_Supply.jpg

Please contact me off group if interested: dandunn(REMOVE THIS
FIRST)@...

----- Original Message -----
From: "Brian Fairey" <bfairey@...>
To: <info@...>; "ahha_cnc" <ahha_cnc@yahoogroups.com>; "CAD"
<CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, September 27, 2003 11:35 AM
Subject: [CAD_CAM_EDM_DRO] Powersupply


> What do you reccomend as a PS to drive 3 - 201's and
> 2 steppers NEMA 40, 2.5v, 4.5A, 2.8mH, 2200mNm, 1.8deg
> and another motor at a lesser rating.
> Basically I am replacing a AHHA system but can I use the AHHA software
> and what do I do about the AHHA IFB board.
> Thanks
> Brian.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>