Re: [CAD_CAM_EDM_DRO] Powersupply
Posted by
Dan
on 2003-09-27 20:29:08 UTC
Hi Brian;
I have some pieces that you might be interested. $60 plus shipping
All are new and tested
44VCT toroidal transformer - 250va
(2 x 22V secondaries at 120V input)
56,000uf 63v Capacitor with hold down clamp
Bridge Rectifier
Combined components will result in a 60vdc 5A power supply
http://66.12.111.114/bay/CNC/Power_Supply.jpg
Please contact me off group if interested:
dandunn(REMOVE THIS FIRST)@...
I have some pieces that you might be interested. $60 plus shipping
All are new and tested
44VCT toroidal transformer - 250va
(2 x 22V secondaries at 120V input)
56,000uf 63v Capacitor with hold down clamp
Bridge Rectifier
Combined components will result in a 60vdc 5A power supply
http://66.12.111.114/bay/CNC/Power_Supply.jpg
Please contact me off group if interested:
dandunn(REMOVE THIS FIRST)@...
----- Original Message -----
From: "Brian Fairey" <bfairey@...>
To: <info@...>; "ahha_cnc" <ahha_cnc@yahoogroups.com>; "CAD"
<CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, September 27, 2003 11:35 AM
Subject: [CAD_CAM_EDM_DRO] Powersupply
> What do you reccomend as a PS to drive 3 - 201's and
> 2 steppers NEMA 40, 2.5v, 4.5A, 2.8mH, 2200mNm, 1.8deg
> and another motor at a lesser rating.
> Basically I am replacing a AHHA system but can I use the AHHA software
> and what do I do about the AHHA IFB board.
> Thanks
> Brian.
>
Discussion Thread
JanRwl@A...
2003-09-27 10:04:09 UTC
Re: [CAD_CAM_EDM_DRO] Powersupply
turbulatordude
2003-09-27 10:50:28 UTC
Re: Powersupply
Dan
2003-09-27 12:02:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Powersupply
Dan
2003-09-27 12:03:07 UTC
Re: [CAD_CAM_EDM_DRO] Powersupply
Doug Fortune
2003-09-27 12:08:05 UTC
Re: [CAD_CAM_EDM_DRO] Powersupply
Doug Fortune
2003-09-27 12:22:41 UTC
Re: [CAD_CAM_EDM_DRO] Powersupply
Dan
2003-09-27 20:26:08 UTC
Re: [CAD_CAM_EDM_DRO] Powersupply
Dan
2003-09-27 20:29:08 UTC
Re: [CAD_CAM_EDM_DRO] Powersupply
John Haddy
2003-09-28 00:47:49 UTC
RE: [CAD_CAM_EDM_DRO] Powersupply