CAD CAM EDM DRO - Yahoo Group Archive

Re: Anyone using a cold air gun?

on 2003-10-23 16:31:15 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Jason Spangle"
<jasonspangle@h...> wrote:
> Hello,
>
> I'm thinking about adding a cold air gun to my small cnc machine for
> production in delrin, brass, and aluminum.
>
> Does anyone have one of these? A company called Vortec makes them,
> I'm sure other companies probably have them too, and I found the
> Vortec brand at MSC Direct's site.
>
> I was planning on setting up all this in conjunction with my chip
> collector, the cold air jets pointing toward the suction area of the
> collector (on the other side of the cutting tool). This will
probably
> work real great with messy plastics.
>
> any experience with these tools would be greatly appreciated,
>
> Jason


Hi JAson,

it sounds like you are not as interested in the cold part as the
suction part ? for a compressed air vacuum, you might find more
volume and less hp.

for cooling, air is about 1/10th as efficient as water so you would
need 5 times more air to get close to the cooling effects of water.

Blowing chips away is a whole different matter.

Dave

Discussion Thread

Jason Spangle 2003-10-23 11:09:02 UTC Anyone using a cold air gun? mayfieldtm 2003-10-23 12:17:46 UTC Re: Anyone using a cold air gun? Kim Lux 2003-10-23 13:29:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Anyone using a cold air gun? Bob Simon 2003-10-23 16:21:22 UTC Re: [CAD_CAM_EDM_DRO] Anyone using a cold air gun? turbulatordude 2003-10-23 16:31:15 UTC Re: Anyone using a cold air gun? Leslie M. Watts 2003-10-23 16:54:47 UTC RE: [CAD_CAM_EDM_DRO] Re: Anyone using a cold air gun? Jason Spangle 2003-10-24 15:36:16 UTC Re: Anyone using a cold air gun? feraleng 2003-10-24 19:55:19 UTC Re: Anyone using a cold air gun? davidfuchs42 2003-10-24 21:08:41 UTC Re: Anyone using a cold air gun? davidfuchs42 2003-10-24 21:16:31 UTC Re: Anyone using a cold air gun? skykotech 2003-10-25 07:42:25 UTC Re: Anyone using a cold air gun? Tim Goldstein 2003-10-25 07:58:24 UTC RE: [CAD_CAM_EDM_DRO] Re: Anyone using a cold air gun?