Re: [CAD_CAM_EDM_DRO] Re: router

If is just a dimmer, I know how to build one. I thought it may be a bit more
to it.
Jim

----- Original Message -----
From: "bank haam" <y2kknight@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, October 31, 2003 3:58 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: router


> I agreed with Hydro. However; if you want to do some little soldering and
wants to get into electronic, visit your local electronic store (Radio
Shack), they should have books, electronic kits and parts available. I
built my own and tailor it to fit with my Driver box. Got a pic of the
router if anyone interested.
>
> Best Regard,
>
> Ben
>
> fast25hydro <bbirling@...> wrote:
> Save the time. Go out and buy a dimmer switch from your local
> hardware store. $2.99. put it in line before the outlet you plug the
> router into and away you go.
>
>
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "afogassa"
> wrote:
> > Ben, I'm interest in the controll circuit , where can I get it?
> >
> > Fogassa
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, bank haam
> > wrote:
> > > RotoZip and a homemade speed control. Parts are available at
> Radio
> > Shack and the schematic I used from 'Encyclopedia of Electronic
> > Circuits'.
> > >
> > > Ben
> > >
> > > James Cullins wrote:
> > > what router and speed control do you use?
> > > Jim
> > > ----- Original Message -----
> > > From: "bank haam"
> > > To:
> > > Sent: Wednesday, October 29, 2003 10:10 AM
> > > Subject: Re: [CAD_CAM_EDM_DRO] router
> > >
> > >
> > > > Hi,
> > > >
> > > > I'm very happy to report that by adding a Speed controller to
> the
> > router
> > > really help.. Here are the advantages: 1. Noise level can be
> > control; Doggy
> > > is smiling now :) . 40-50% of the power is all you need (max
> 30,000
> > rpm).
> > > 2. Torque remains constant. 3. Cuts are cleaner, not burning like
> > before.
> > > >
> > > > I'm taking on adding a Digital Tachometer to my router and
> maybe
> > create
> > > the next generation of router.....
> > > >
> > > > Best Regard,
> > > >
> > > > Ben
> > > >
> > > > Robert Campbell wrote:
> > > > A trimmer router is OK if you are not going to cut very much.
> > > >
> > > > I would recommend the Makita 2.25 hp router. It is quiet.
> > > >
> > > > For almost all my routing, I use the 3.25 hp Porter Cable
> router.
> > > >
> > > > Bob Campbell
> > > > ----- Original Message -----
> > > > From: "afogassa"
> > > > To:
> > > > Sent: Tuesday, October 28, 2003 10:28 AM
> > > > Subject: [CAD_CAM_EDM_DRO] router
> > > >
> > > >
> > > > > HI, All
> > > > > I've a need for a spindle for my gantry cnc,i was thinking
> about
> > > > > using a dewalt trimmer (about 600w) and use a pwm dc motor
> > controll
> > > > > to adjust the speed.
> > > > > I could use the controller from my grizzly milling machine.
> > what do
> > > > > you think about?
> > > > >
> > > > >
> > > > > Addresses:
> > > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > > >
> > > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > wanliker@a...,
> > > > timg@k...
> > > > > Moderator: pentam@c... indigo_red@q... [Moderators]
> > > > > URL to this group:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > > >
> > > > > OFF Topic POSTS: General Machining
> > > > > If you wish to post on unlimited OT subjects goto:
> > > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > reach it
> > > if
> > > > you have trouble.
> > > > > http://www.metalworking.com/news_servers.html
> > > > >
> > > > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> > to be a
> > > > sister site to the CCED group, as many of the same members are
> > there, for
> > > OT
> > > > subjects, that are not allowed on the CCED list.
> > > > >
> > > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > POSTING THEM.
> > > > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > > > bill
> > > > > List Mom
> > > > > List Owner
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > > > >
> > > >
> > > >
> > > >
> > > > Addresses:
> > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > >
> > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@a...,
> > > timg@k...
> > > > Moderator: pentam@c... indigo_red@q... [Moderators]
> > > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > >
> > > > OFF Topic POSTS: General Machining
> > > > If you wish to post on unlimited OT subjects goto:
> > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > reach it if
> > > you have trouble.
> > > > http://www.metalworking.com/news_servers.html
> > > >
> > > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> to
> > be a
> > > sister site to the CCED group, as many of the same members are
> > there, for OT
> > > subjects, that are not allowed on the CCED list.
> > > >
> > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > POSTING THEM.
> > > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > > bill
> > > > List Mom
> > > > List Owner
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> > > > ---------------------------------
> > > > Do you Yahoo!?
> > > > Exclusive Video Premiere - Britney Spears
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > > >
> > > >
> > > > Addresses:
> > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > >
> > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@a...,
> > > timg@k...
> > > > Moderator: pentam@c... indigo_red@q... [Moderators]
> > > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > >
> > > > OFF Topic POSTS: General Machining
> > > > If you wish to post on unlimited OT subjects goto:
> > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > reach it if
> > > you have trouble.
> > > > http://www.metalworking.com/news_servers.html
> > > >
> > > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> to
> > be a
> > > sister site to the CCED group, as many of the same members are
> > there, for OT
> > > subjects, that are not allowed on the CCED list.
> > > >
> > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > POSTING THEM.
> > > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > > bill
> > > > List Mom
> > > > List Owner
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...,
> > timg@k...
> > > Moderator: pentam@c... indigo_red@q... [Moderators]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach
> > it if you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this to
> be
> > a sister site to the CCED group, as many of the same members are
> > there, for OT subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING
> > THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > > ---------------------------------
> > > Do you Yahoo!?
> > > Exclusive Video Premiere - Britney Spears
> > >
> > > [Non-text portions of this message have been removed]
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Exclusive Video Premiere - Britney Spears
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>