Re: Router life, getting better bearings,
Posted by
ballendo
on 2003-11-03 04:38:29 UTC
Hello,
Many bearing mfrs. already use krytox in their bearings. But
most "bearing shops" don't have a clue; so you have to go the bearing
mfrs first... FWIW, krytox is a DuPont product.
Having said that, the better grade bearings used with any decent
modern grease will be a big improvement, IME.
Here's a link to show why you want to try krytox:
http://www.sandsmachine.com/ac_greas.htm
Hope this helps,
Ballendo
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "thorcnc" <bthorley@p...>
wrote:
Many bearing mfrs. already use krytox in their bearings. But
most "bearing shops" don't have a clue; so you have to go the bearing
mfrs first... FWIW, krytox is a DuPont product.
Having said that, the better grade bearings used with any decent
modern grease will be a big improvement, IME.
Here's a link to show why you want to try krytox:
http://www.sandsmachine.com/ac_greas.htm
Hope this helps,
Ballendo
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "thorcnc" <bthorley@p...>
wrote:
> Bob, Dave, and Ballendo,and
>
> Thank you for your replies! Very good insights. Ballendo, I'm
> printing out your reply so I might be able to find this Krytox
> grease. 100 hours comes awfully quickly even on a home machine,
> I'd rather have the reliability.
>
> Regards,
>
> Brent
Discussion Thread
thorcnc
2003-11-01 07:48:33 UTC
Router life, getting better bearings,
David A. Frantz
2003-11-01 08:53:49 UTC
Re: [CAD_CAM_EDM_DRO] Router life, getting better bearings,
Robert Campbell
2003-11-01 11:53:53 UTC
Re: [CAD_CAM_EDM_DRO] Router life, getting better bearings,
thorcnc
2003-11-01 15:53:51 UTC
Re: Router life, getting better bearings,
wanliker@a...
2003-11-01 16:31:59 UTC
Re: Router life, getting better bearings,
David A. Frantz
2003-11-02 10:57:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Router life, getting better bearings,
ballendo
2003-11-02 13:47:10 UTC
Re: Router life, getting better bearings,
Bob Muse
2003-11-02 16:22:48 UTC
[CAD_CAM_EDM_DRO] Re: Router life, getting better bearings,
thorcnc
2003-11-02 19:58:43 UTC
Re: Router life, getting better bearings,
ballendo
2003-11-03 04:38:29 UTC
Re: Router life, getting better bearings,
Vince Negrete
2003-11-03 07:20:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Router life, getting better bearings,
David A. Frantz
2003-11-03 11:11:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Router life, getting better bearings,
carlcnc
2003-11-03 12:09:14 UTC
Re: Router life, getting better bearings,
ballendo
2003-11-04 03:22:15 UTC
Krytox flourine a problem?
ballendo
2003-11-04 03:42:21 UTC
Re: Router life, getting better bearings,
ballendo
2003-11-04 03:46:09 UTC
Re: Router life, getting better bearings,
David A. Frantz
2003-11-04 06:55:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Router life, getting better bearings,
Tim Goldstein
2003-11-04 08:09:50 UTC
RE: [CAD_CAM_EDM_DRO] Declared OT: Re: Router life, getting better bearings,
ballendo
2003-11-04 16:16:18 UTC
Re: Router life, getting better bearings,
jmorrphd2
2003-11-04 23:59:12 UTC
Re: Krytox flourine a problem?