RE: [CAD_CAM_EDM_DRO] I need some help with servo's PLZ!!!! RETROFIT

> -----Original Message-----
> I thought a 600in/oz servo with 900rpm would have enough power to run
> my Knee mill. The individual I want to purchase a drive kit from
> does not agree with me (AHEM Camtronics) My table is 30" x 15"
> already running a cnc control that i am removing (don't ask why) The
> current motors are 500in/oz and 2000 rpm, i'm not concerned about the
> rpm because the spindle speed is going to restrict the feedrate.
> Additionally the 600in/oz motors would be running from gecko drives.
> How can i find out if this is enough servo or not, also let me know
> if this setup will work. This mill is a Shizouka with ballsrews.

Dan at Camtronics is a VERY knowledgeable and honest guy. If he is
trying to talk you out of an item he sells as being not suitable beieve
him. He is quite familiar with the requirements of machines from table
top to full sized and very well versed on the items he sells. I would
strongly recommend following his advise.

Tim
[Denver, CO]
Sherline & Taig products at Deep Discount
Mach1 & DeskCNC with credit card ordering
www.KTMarketing.com/Sherline
e-mail me at Timg @ KTMarketing.com for items not yet listed