Re: [CAD_CAM_EDM_DRO] I need some help with servo's PLZ!!!! RETROFIT

I agree Dan gives very good advise. He has helped me.
Jim

----- Original Message -----
From: "Tim Goldstein" <timg@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, November 04, 2003 8:39 PM
Subject: RE: [CAD_CAM_EDM_DRO] I need some help with servo's PLZ!!!!
RETROFIT


> > -----Original Message-----
> > I thought a 600in/oz servo with 900rpm would have enough power to run
> > my Knee mill. The individual I want to purchase a drive kit from
> > does not agree with me (AHEM Camtronics) My table is 30" x 15"
> > already running a cnc control that i am removing (don't ask why) The
> > current motors are 500in/oz and 2000 rpm, i'm not concerned about the
> > rpm because the spindle speed is going to restrict the feedrate.
> > Additionally the 600in/oz motors would be running from gecko drives.
> > How can i find out if this is enough servo or not, also let me know
> > if this setup will work. This mill is a Shizouka with ballsrews.
>
>
> Dan at Camtronics is a VERY knowledgeable and honest guy. If he is
> trying to talk you out of an item he sells as being not suitable beieve
> him. He is quite familiar with the requirements of machines from table
> top to full sized and very well versed on the items he sells. I would
> strongly recommend following his advise.
>
> Tim
> [Denver, CO]
> Sherline & Taig products at Deep Discount
> Mach1 & DeskCNC with credit card ordering
> www.KTMarketing.com/Sherline
> e-mail me at Timg @ KTMarketing.com for items not yet listed
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>