Re: I need some help with servo's PLZ!!!! RETROFIT

Anyone who is trying to talk you out of a sale for himself ($$) is
giving you something very rare; honest advice. Trust it.

Mariss


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "twoextrememachine"
<twoextrememachine@y...> wrote:

> I thought a 600in/oz servo with 900rpm would have enough power to

run

> my Knee mill. The individual I want to purchase a drive kit from
> does not agree with me (AHEM Camtronics) My table is 30" x 15"
> already running a cnc control that i am removing (don't ask why)

The

> current motors are 500in/oz and 2000 rpm, i'm not concerned about

the

> rpm because the spindle speed is going to restrict the feedrate.
> Additionally the 600in/oz motors would be running from gecko

drives.

> How can i find out if this is enough servo or not, also let me know
> if this setup will work. This mill is a Shizouka with ballsrews.