RE: [CAD_CAM_EDM_DRO] I need some help with servo's PLZ!!!! RETROFIT

I need more information than that, getting information from Dan is like pulling teeth

Tim Goldstein <timg@...> wrote:> -----Original Message-----

> I thought a 600in/oz servo with 900rpm would have enough power to run
> my Knee mill. The individual I want to purchase a drive kit from
> does not agree with me (AHEM Camtronics) My table is 30" x 15"
> already running a cnc control that i am removing (don't ask why) The
> current motors are 500in/oz and 2000 rpm, i'm not concerned about the
> rpm because the spindle speed is going to restrict the feedrate.
> Additionally the 600in/oz motors would be running from gecko drives.
> How can i find out if this is enough servo or not, also let me know
> if this setup will work. This mill is a Shizouka with ballsrews.

Dan at Camtronics is a VERY knowledgeable and honest guy. If he is
trying to talk you out of an item he sells as being not suitable beieve
him. He is quite familiar with the requirements of machines from table
top to full sized and very well versed on the items he sells. I would
strongly recommend following his advise.

Tim
[Denver, CO]
Sherline & Taig products at Deep Discount
Mach1 & DeskCNC with credit card ordering
www.KTMarketing.com/Sherline
e-mail me at Timg @ KTMarketing.com for items not yet listed



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




---------------------------------
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard

[Non-text portions of this message have been removed]