Re: [CAD_CAM_EDM_DRO] Re: What would be a good power supply for this

They look exactly like the Electrocraft servo (same number anyway). If
they are the same as mine, they should have a renco encoder on the
back. I do have the pinout for these type. The motors themselves are
max 60vdc and produce 1500 inoz torque max. 350~ inoz cont. They are
aluminum ends with a stainless body.

John Johnson wrote:

>This doesn't sound like a servo motor, it sounds more like a spindle
>motor for old disk drives. If it's a spindle motor, it probably isn't
>designed to work at very low RPMs like servo motors.
>
>Just my $0.02.
>
>Regards,
> JJ
>
>On Sunday, November 9, 2003, at 11:56 AM, kidderkeith wrote:
>
>
>
>>You must be talking about these:
>>http://sales.goldmine-elec.com/prodinfo.asp?prodid=7060
>>
>>Might anyone have anymore info on these motors other than the vague
>>voltage/amperage ratings on the website? The website the lists the
>>loaded current draw to be about 1.8 Amps. Given it's size, 40V at
>>1.8A doesn't sound like a very powerful motor.
>>
>>-Keith Kidder
>>
>>
>>
>>--- In CAD_CAM_EDM_DRO@yahoogroups.com, Erie Patsellis <erie@s...>
>>wrote:
>>
>>
>>>Goldmine electronics also has some Electrocraft motors with
>>>
>>>
>>encoders on
>>
>>
>>>them for around $59 that are a little beefier..
>>>
>>>erie
>>>
>>>twoextrememachine wrote:
>>>
>>>
>>>
>>>>I'd like to know what would be a good power supply for these
>>>>
>>>>
>>motors
>>
>>
>>>>on ebay 2570854613 Also let me know if these motors would work
>>>>
>>>>
>>good
>>
>>
>>>>for a Shizouka retrofit running with gecko's
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>Addresses:
>>>>FAQ: http://www.ktmarketing.com/faq.html
>>>>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>>>>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>>>
>>>>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>>>>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>>>>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
>>>>
>>>>
>>wanliker@a..., timg@k...
>>
>>
>>>>Moderator: pentam@c... indigo_red@q... [Moderators]
>>>>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>>>
>>>>OFF Topic POSTS: General Machining
>>>>If you wish to post on unlimited OT subjects goto:
>>>>
>>>>
>>aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>>reach it if you have trouble.
>>
>>
>>>>http://www.metalworking.com/news_servers.html
>>>>
>>>>http://groups.yahoo.com/group/jobshophomeshop I consider this
>>>>
>>>>
>>to be a sister site to the CCED group, as many of the same members
>>are there, for OT subjects, that are not allowed on the CCED list.
>>
>>
>>>>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
>>>>
>>>>
>>POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
>>EXCEPTIONS........
>>
>>
>>>>bill
>>>>List Mom
>>>>List Owner
>>>>
>>>>
>>>>
>>>>Your use of Yahoo! Groups is subject to
>>>>
>>>>
>>http://docs.yahoo.com/info/terms/
>>
>>
>>>>
>>>>
>>>>
>>>>
>>
>>Addresses:
>>FAQ: http://www.ktmarketing.com/faq.html
>>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>
>>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>>timg@...
>>Moderator: pentam@... indigo_red@... [Moderators]
>>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>
>>OFF Topic POSTS: General Machining
>>If you wish to post on unlimited OT subjects goto:
>>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
>>it if you have trouble.
>>http://www.metalworking.com/news_servers.html
>>
>>http://groups.yahoo.com/group/jobshophomeshop I consider this to be
>>a sister site to the CCED group, as many of the same members are
>>there, for OT subjects, that are not allowed on the CCED list.
>>
>>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>>bill
>>List Mom
>>List Owner
>>
>>
>>
>>Your use of Yahoo! Groups is subject to
>>http://docs.yahoo.com/info/terms/
>>
>>
>>
>>
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>

[Non-text portions of this message have been removed]