Re: [CAD_CAM_EDM_DRO] What would be a good power supply for this

twoextrememachine wrote:

>I'd like to know what would be a good power supply for these motors
>on ebay 2570854613 Also let me know if these motors would work good
>for a Shizouka retrofit running with gecko's
>
>
>

Mostly pretty good. He doesn't list the peak torque or current, or the
continuous torque rating. See if you can get that info. Otherwise,
it sounds like it should work for a modest-performance non-commercial
retrofit. You may want some belt reduction ratio on these, although
they are pretty strong. but, when running in direct drive, the motors
get a lot hotter.

Jon