Re: What would be a good power supply for this
Posted by
volitan712003
on 2003-11-05 18:38:18 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "twoextrememachine"
<twoextrememachine@y...> wrote:
motor is going on the Goldmine Electronics website for about $25 a
piece. They're currently on sale, down from around $49. That plus
encoders from the us digital website (I think around $40) and you have
something very similar for around $275 or so. Something to keep in
mind if bidding for those motors gets crazy.
Good Luck!
David
<twoextrememachine@y...> wrote:
> I'd like to know what would be a good power supply for these motorsgood
> on ebay 2570854613 Also let me know if these motors would work
> for a Shizouka retrofit running with gecko'sSorry I can't answer that. Just wanted to let you know that a similar
motor is going on the Goldmine Electronics website for about $25 a
piece. They're currently on sale, down from around $49. That plus
encoders from the us digital website (I think around $40) and you have
something very similar for around $275 or so. Something to keep in
mind if bidding for those motors gets crazy.
Good Luck!
David
Discussion Thread
twoextrememachine
2003-11-05 17:02:18 UTC
What would be a good power supply for this
volitan712003
2003-11-05 18:38:18 UTC
Re: What would be a good power supply for this
Jon Elson
2003-11-05 22:38:46 UTC
Re: [CAD_CAM_EDM_DRO] What would be a good power supply for this
Erie Patsellis
2003-11-06 07:29:55 UTC
Re: [CAD_CAM_EDM_DRO] What would be a good power supply for this
kidderkeith
2003-11-09 09:16:29 UTC
Re: What would be a good power supply for this
John Johnson
2003-11-09 12:09:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: What would be a good power supply for this
David Paulson
2003-11-09 16:59:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: What would be a good power supply for this
Erie Patsellis
2003-11-09 17:22:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: What would be a good power supply for this
Jon Elson
2003-11-09 17:24:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: What would be a good power supply for this