CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Cheap drivers - special offer from Phytron.de

Posted by Tony Jeffree
on 2003-11-14 08:37:22 UTC
Mark -

The data sheet clearly shows that the range of current settings stops at
3.5A/phase max. Add the 30% boost feature, you get near enough 4.5A/phase.
Multiply by 2 phases, you get 9A max.

There is an "overdrive" feature that compensates for reduced motor current
at high step rates and appears to adaptively increase the phase current in
those circumstances to a max of 6.3A/phase, but you don't get that at low
step rates.

Still looks like good value to me for driving medium-sized steppers.

Regards,
Tony

At 12:36 14/11/2003 +0000, you wrote:
>Tony,
>
>Do you read this into the datasheet? It is a bit ambiguous, as on the
>first page it says 9A motor current, and on the second it says 9A max
>phase current. I have written Phytron for clarification.
>
>
>Regards
>Mark
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, Tony Jeffree <tony@j...>
>wrote:
> > Read the spec carefully - they are actually 4.5A/phase max (i.e.,
>9A
> > total), not 9A/phase. You can set currents up to 3.5A, and then
>apply the
> > 30% "boost" feature to get to 4.5a.
> >
> > Regards,
> > Tony
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects
>goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Regards,
Tony

Discussion Thread

rotarysmp 2003-11-09 06:54:48 UTC Cheap drivers - special offer from Phytron.de Les Newell 2003-11-09 12:09:41 UTC Re: [CAD_CAM_EDM_DRO] Cheap drivers - special offer from Phytron.de stevenson_engineers 2003-11-09 12:17:50 UTC Re: Cheap drivers - special offer from Phytron.de rotarysmp 2003-11-09 23:46:30 UTC Re: Cheap drivers - special offer from Phytron.de Les Newell 2003-11-10 09:57:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Cheap drivers - special offer from Phytron.de rotarysmp 2003-11-10 10:40:46 UTC Re: Cheap drivers - special offer from Phytron.de ajv2803959 2003-11-13 04:08:11 UTC Re: Cheap drivers - special offer from Phytron.de Les Newell 2003-11-13 04:22:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Cheap drivers - special offer from Phytron.de Les Newell 2003-11-13 07:05:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Cheap drivers - special offer from Phytron.de Tony Jeffree 2003-11-13 07:50:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Cheap drivers - special offer from Phytron.de Tony Jeffree 2003-11-13 07:51:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Cheap drivers - special offer from Phytron.de rotarysmp 2003-11-14 02:58:12 UTC Re: Cheap drivers - special offer from Phytron.de ajv2803959 2003-11-14 03:18:41 UTC Re: Cheap drivers - special offer from Phytron.de rotarysmp 2003-11-14 04:37:01 UTC Re: Cheap drivers - special offer from Phytron.de Tony Jeffree 2003-11-14 08:37:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Cheap drivers - special offer from Phytron.de