Re: [CAD_CAM_EDM_DRO] CAM software with 2D relief capabilities

Brad,

When you say 2D contour. Are you asking for a surface that can be
continuously varying?

FreeMill will do that. It is from MecSoft www.mecsoft.com and it is free.

Bob Campbell
http://www.campbelldesigns.com
Breakout Boards
VisualMill 5.0 basic

----- Original Message -----
From: "Brad Eyben" <abeyben@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, November 22, 2003 1:41 PM
Subject: [CAD_CAM_EDM_DRO] CAM software with 2D relief capabilities


> Does anybody know of an affordable CAD/CAM package that will produce a
> surface from a 2D contour which has a relief up or down.
> Thanks,
> Brad
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>