CAD CAM EDM DRO - Yahoo Group Archive

Re: Series 1 Bridegport CNC manuals?

Posted by washcomp
on 2003-12-07 14:11:36 UTC
If you had a convenient way to have it activated when your servos or
steppers are in use rather than all the time it might be better.
Otherwise, you're dribbling lubricant when the table is not in motion.

Low oil indication is good, but don't place all your trust in it.
Check the oil periodicly anyway. If it allways seems full, check for
a blockage (the low oil light won't come on if it never gets used) ;-(

Jeff

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Paul <no.spam27@n...> wrote:
>
> Hi Les
>
> Acocording to my wiring diagram, the Bijur pump is live (at 110V)
all the
> time the servo supply is active. So, I would say connect it up and
leave it
> to it's own devices - An Oil Level Low warning light would be worth
hooking
> up...
>
> Regards, Paul.
>
>
> On Sunday 07 December 2003 7:14 pm, Les Newell wrote:
> > The machine is fitted with a Bijur automatic oiler. Do you know
what
> > signals I need to send it to get it to operate? I assume it isn't
just a
> > case of apply 110V and let it get on with it :-)
>
> --
> irc channel for EMC users at irc.freenode.org
> /join #emc
> and chat to other users (not many there yet).

Discussion Thread

riaanbarnard2000 2003-12-04 12:41:11 UTC Spindle controll Les Newell 2003-12-06 05:18:43 UTC Series 1 Bridegport CNC manuals? vavaroutsos 2003-12-06 09:25:42 UTC Re: Series 1 Bridegport CNC manuals? jim davies 2003-12-06 10:44:41 UTC Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals? Steve 2003-12-06 11:06:26 UTC Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals? Jon Elson 2003-12-06 15:11:20 UTC Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals? Les Newell 2003-12-07 06:02:38 UTC Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals? Egroupscdh (E-mail) 2003-12-07 07:10:42 UTC RE: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals? Robert Williams 2003-12-07 07:21:11 UTC Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals? vavaroutsos 2003-12-07 10:12:41 UTC Re: Series 1 Bridegport CNC manuals? Les Newell 2003-12-07 11:13:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals? stevenson_engineers 2003-12-07 12:42:56 UTC Re: Series 1 Bridegport CNC manuals? Paul 2003-12-07 14:03:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals? washcomp 2003-12-07 14:11:36 UTC Re: Series 1 Bridegport CNC manuals? Les Newell 2003-12-07 14:26:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals? Jon Elson 2003-12-07 16:24:58 UTC Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals? Jon Elson 2003-12-07 16:30:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals? Jon Elson 2003-12-07 16:46:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals? Hugh Prescott 2003-12-07 20:52:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals? vavaroutsos 2003-12-07 21:29:21 UTC Re: Series 1 Bridegport CNC manuals? Les Newell 2003-12-08 01:16:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals? Les Newell 2003-12-08 01:21:15 UTC Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals? Larry Van Duyn 2003-12-08 05:30:26 UTC Re[2]: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals? Jon Elson 2003-12-08 09:13:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals? Les Newell 2003-12-19 12:38:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals? Brad Eyben 2003-12-19 18:18:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?