Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?

Thanks Paul,

It looks nice and easy then. Probably the best thing to do is run a
relay off the spindle control signal. That way there will be oil flowing
whenever the machine is cutting.

If there is already a low level switch I will use it but it is not that
important - the pump has a transparent reservoir and is easily visible.
This machine won't be used for production work so the oil will probably
last a very long time.

Les

>Hi Les
>
>Acocording to my wiring diagram, the Bijur pump is live (at 110V) all the
>time the servo supply is active. So, I would say connect it up and leave it
>to it's own devices - An Oil Level Low warning light would be worth hooking
>up...
>
>Regards, Paul.
>
>
>On Sunday 07 December 2003 7:14 pm, Les Newell wrote:
>
>
>>The machine is fitted with a Bijur automatic oiler. Do you know what
>>signals I need to send it to get it to operate? I assume it isn't just a
>>case of apply 110V and let it get on with it :-)
>>
>>
>
>
>