Re[2]: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?
Posted by
Larry Van Duyn
on 2003-12-08 05:30:26 UTC
Hello Jon,
JE> Les Newell wrote:
JE> put the oiler on that. Or, you might hook it to the spindle relay. It
JE> might be
JE> best to have it start pumping immediately when you power up, so the table
JE> can be lubed while you are setting up. I think the oiler they put on the
JE> BOSS machines is designed to run all the time, and it strokes the
JE> oil pump every 30 minutes or so.
JE> Jon
My Bridgeport is wired so that the lube pump runs whenever the spindle motor is
running and it does stroke the pump every 30 minutes. I suppose the theory
behind that is if the spindle is not running, then the table is probably not
moving either. Seems to work as I have plenty of lube all over..
Best regards,
Larry mailto:lvanduyn@...
JE> Les Newell wrote:
>>The machine is fitted with a Bijur automatic oiler. Do you know whatJE> If you set up a relay to turn the Gecko drive power on and off, you can also
>>signals I need to send it to get it to operate? I assume it isn't just a
>>case of apply 110V and let it get on with it :-)
>>
>>
JE> put the oiler on that. Or, you might hook it to the spindle relay. It
JE> might be
JE> best to have it start pumping immediately when you power up, so the table
JE> can be lubed while you are setting up. I think the oiler they put on the
JE> BOSS machines is designed to run all the time, and it strokes the
JE> oil pump every 30 minutes or so.
JE> Jon
My Bridgeport is wired so that the lube pump runs whenever the spindle motor is
running and it does stroke the pump every 30 minutes. I suppose the theory
behind that is if the spindle is not running, then the table is probably not
moving either. Seems to work as I have plenty of lube all over..
Best regards,
Larry mailto:lvanduyn@...
Discussion Thread
riaanbarnard2000
2003-12-04 12:41:11 UTC
Spindle controll
Les Newell
2003-12-06 05:18:43 UTC
Series 1 Bridegport CNC manuals?
vavaroutsos
2003-12-06 09:25:42 UTC
Re: Series 1 Bridegport CNC manuals?
jim davies
2003-12-06 10:44:41 UTC
Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals?
Steve
2003-12-06 11:06:26 UTC
Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals?
Jon Elson
2003-12-06 15:11:20 UTC
Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals?
Les Newell
2003-12-07 06:02:38 UTC
Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals?
Egroupscdh (E-mail)
2003-12-07 07:10:42 UTC
RE: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals?
Robert Williams
2003-12-07 07:21:11 UTC
Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals?
vavaroutsos
2003-12-07 10:12:41 UTC
Re: Series 1 Bridegport CNC manuals?
Les Newell
2003-12-07 11:13:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?
stevenson_engineers
2003-12-07 12:42:56 UTC
Re: Series 1 Bridegport CNC manuals?
Paul
2003-12-07 14:03:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?
washcomp
2003-12-07 14:11:36 UTC
Re: Series 1 Bridegport CNC manuals?
Les Newell
2003-12-07 14:26:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?
Jon Elson
2003-12-07 16:24:58 UTC
Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals?
Jon Elson
2003-12-07 16:30:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?
Jon Elson
2003-12-07 16:46:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?
Hugh Prescott
2003-12-07 20:52:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?
vavaroutsos
2003-12-07 21:29:21 UTC
Re: Series 1 Bridegport CNC manuals?
Les Newell
2003-12-08 01:16:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?
Les Newell
2003-12-08 01:21:15 UTC
Re: [CAD_CAM_EDM_DRO] Series 1 Bridegport CNC manuals?
Larry Van Duyn
2003-12-08 05:30:26 UTC
Re[2]: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?
Jon Elson
2003-12-08 09:13:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?
Les Newell
2003-12-19 12:38:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?
Brad Eyben
2003-12-19 18:18:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series 1 Bridegport CNC manuals?