Re: [CAD_CAM_EDM_DRO] Shop Air Lines
Posted by
Jon Elson
on 2003-12-09 22:06:06 UTC
Ron K wrote:
got an oil-lubed compressor, I replaced all the plastic with copper line
after a short while. I noticed no deterioration in the plastic when I tore
it out. But, others have reported some nasty problems. This was also
a single stage compressor, so only about 95 PSI.
Jon
>Thanks to all who answered , I had no idea it was so complicated of aI used PVC water pipe for years with my oilless compressor. When I
>subject , but I now understand the reasons for not using plastic .
>I think I will switch mine to copper when I get time.
>
>
>
>
got an oil-lubed compressor, I replaced all the plastic with copper line
after a short while. I noticed no deterioration in the plastic when I tore
it out. But, others have reported some nasty problems. This was also
a single stage compressor, so only about 95 PSI.
Jon
Discussion Thread
Ron K
2003-12-09 17:22:46 UTC
Shop Air Lines
Jon Elson
2003-12-09 22:06:06 UTC
Re: [CAD_CAM_EDM_DRO] Shop Air Lines
turbulatordude
2003-12-10 07:37:38 UTC
Re: Shop Air Lines
Chris Cowley
2003-12-10 19:33:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Shop Air Lines
ballendo
2003-12-11 06:40:20 UTC
Re: Shop Air Lines
turbulatordude
2003-12-11 13:39:50 UTC
Re: Shop Air Lines
washcomp
2003-12-11 14:41:51 UTC
Re: Shop Air Lines
Tim Goldstein
2003-12-11 20:34:24 UTC
RE: [CAD_CAM_EDM_DRO] Shop Air Lines