Re: Did It
Posted by
seb fontana
on 2003-12-13 19:18:23 UTC
--- Got the machine home and off the trailer into the garage for some
cleaning and observing..Fired the Trak 2 up and played with it
some..I gonna like this !!! Not sure I will like the cnc Z axis to be
at the spindle--[have to disturb too much to angle head]--think I
could move the motor and the travel wheel to the knee? Since the
spindle ball-screw is .200/rev and the knee screw is .100/rev---will
some sort of calibration be necessary or possible? Only the X axis
motor seems to have an encoder while all 3 axis have travel wheels--
haven't found what feature this creates..I still gonna like this !!
Seb.
cleaning and observing..Fired the Trak 2 up and played with it
some..I gonna like this !!! Not sure I will like the cnc Z axis to be
at the spindle--[have to disturb too much to angle head]--think I
could move the motor and the travel wheel to the knee? Since the
spindle ball-screw is .200/rev and the knee screw is .100/rev---will
some sort of calibration be necessary or possible? Only the X axis
motor seems to have an encoder while all 3 axis have travel wheels--
haven't found what feature this creates..I still gonna like this !!
Seb.
Discussion Thread
seb fontana
2003-12-11 20:44:38 UTC
Did It
seb fontana
2003-12-13 19:18:23 UTC
Re: Did It
Jon Elson
2003-12-14 11:06:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Did It
seb fontana
2003-12-14 21:55:27 UTC
Re: Did It
Jon Elson
2003-12-15 10:19:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Did It