Re: [CAD_CAM_EDM_DRO] Monitor question

Hi Bill,

It'll certainly work, but may not be as sharp as you'd like.

LCD's like to be driven at the resolution they were made for (in this case 1024x768), and will appear a bit fuzzy trying to emulate anything uder this (they can't blur the pixels like a CRT).

Most LCD's have an Auto Adjust switch which has a go at sharpening the image for the settings they are being driven at.

Cheers,
4G.

----- Original Message -----
From: wanliker@...
Date: Wednesday, December 17, 2003 8:10 am
Subject: [CAD_CAM_EDM_DRO] Monitor question

> Setting up a computer for the shop, strictly DOS, with TurboCNC on
> it for
> now, 450 MHZ..
> My question: Can I use a modern LCD monitor on a old DOS computer?
> I assume
> in SVGA, or VGA mode.
> Such as this particular Monitor
> Scanport GL-610AB 1024x768 14" Black LCD Monitor at TigerDirect.com
> >
> http://www.tigerdirect.com/applications/searchtools/item-
> Details.asp?EdpNo=676609&sku=S482-1402&SRCCODE=WEM605C
> If so, Christmass present to myself..
> bill
>
>
> [Non-text portions of this message have been removed]
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to
> be a sister site to the CCED group, as many of the same members
> are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>