CAD CAM EDM DRO - Yahoo Group Archive

GS1 and GS2 an SJ100 and SJ300

Posted by Elizabeth
on 2004-01-03 11:43:16 UTC
At 07:03 PM 1/2/04, Ron Hicks aka veeguy@... wrote:

>The Automation Direct GS2 drives *are* Hitachi drives. A lot of companies
>(Cutler Hammer comes to mind ) also relabel the Hitachi drives as their
>small line of VFDs.


The GS1 and GS2 sold by Automation Direct are NOT Hitachi.
The SJ100 and SJ300 sold by Automation Direct ARE Hitachi (as are the
Cutler Hammer AF91 series).

All of them work well. The GS1 and GS2 are cheaper, but not available in
higher horsepower ratings (over 10hp).

Beware of VERY tight power wiring areas on the Hitachis, particularly the
higher horsepower SJ300's.

Beth

Discussion Thread

Ron Hicks aka veeguy@y... 2004-01-02 16:02:40 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 3563 Ron Hicks aka veeguy@y... 2004-01-02 16:13:28 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 3563 Elizabeth 2004-01-03 11:43:16 UTC GS1 and GS2 an SJ100 and SJ300 cnczeus 2004-01-03 20:10:25 UTC Re: GS1 and GS2 an SJ100 and SJ300