Re: [CAD_CAM_EDM_DRO] Re: Need help with a Hypertherm...
Posted by
David Paulson
on 2004-01-07 06:19:21 UTC
http://www.hypertherm.com/manual/pmax_1000.htm
jeff_birt2000 wrote:
jeff_birt2000 wrote:
>Such tables are normally available from the manufacturer. They are[Non-text portions of this message have been removed]
>normally included with the power supply or torch. The manufacturers
>compile these tables by doing actual cuts so they are an invaluable
>aid. That being said they are only meant to serve as a guide, you
>may find that your optimal settings will vary a bit from the table.
>
>Jeff Birt
>
>
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, "xpc_cjr" <chuck.nan@g...>
>wrote:
>
>
>>Hi,
>>I am a plasma cutter newbie. I recently purchased a 4 x 8 CNC table
>>that I mounted a Hypertherm PowerMax 1000 to with a machine head. I
>>currently have the 40amp nozzle installed, but I also have the 60amp
>>nozzle. I did read through the manual and have correctly done all
>>the
>>hookups. I have been doing some practice cuts and have had decent
>>result, but i want to ask the group for help.
>>
>>I'm sure there are many of you out there with many years of
>>experience
>>and I have none!! Can someone offer me some advice so that i can
>>compile a handy cut chart for myself. I am looking for information
>>such as: material type / thickness / standoff / Amperage / cut
>>
>>
>speed
>
>
>>/ air pressure. I home to cut mild steel, stainless, and aluminum.
>>Right now I am suffering from ALOT of dross and I'm just looking for
>>some guidance.
>>
>>Thank you. If I did post to the wrong group could someone at least
>>tell me where to look for this information.
>>
>>Please post or reply to chuck dot nan at gte dot net
>>
>>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Yahoo! Groups Links
>
>To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
>To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
>Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
Discussion Thread
xpc_cjr
2004-01-06 18:17:25 UTC
Need help with a Hypertherm...
Peter Renolds
2004-01-06 19:25:07 UTC
Re: [CAD_CAM_EDM_DRO] Need help with a Hypertherm...
Robert Campbell
2004-01-06 19:57:24 UTC
Re: [CAD_CAM_EDM_DRO] Need help with a Hypertherm...
Aberegg Tim
2004-01-06 22:15:44 UTC
Re: [CAD_CAM_EDM_DRO] Need help with a Hypertherm...
jeff_birt2000
2004-01-07 06:07:20 UTC
Re: Need help with a Hypertherm...
David Paulson
2004-01-07 06:19:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Need help with a Hypertherm...
caudlet
2004-01-09 20:58:32 UTC
Re: Need help with a Hypertherm...