Re: Flexible Couplers on Retrofit?
Posted by
jeffalanp
on 2004-01-09 09:40:14 UTC
Hi,
It sound like you are talking about "oldham" couplings. Here in
the states you can get the center replacement disk (coupling too if
you don't want to make your own) from McMaster-Carr.
Jeff
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Robin Szemeti <list@r...>
wrote:
It sound like you are talking about "oldham" couplings. Here in
the states you can get the center replacement disk (coupling too if
you don't want to make your own) from McMaster-Carr.
Jeff
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Robin Szemeti <list@r...>
wrote:
> On Thursday 08 January 2004 19:26, Peter Renolds wrote:couplings are
> My 3 helical zero-backlash couplers for a
> > Bridgeport sized mill set me back over a hundred each!
>
> I bought a bunch of those replacement discs for whatever those
> .. the slots at 90 degrees on each side that mount on a spigot onthe
> coupling? .. whatver, they are about 2 dollars for the spare discs,and I
> milled the coupling pieces up from scrap bar lieing about theshop ... added
> soem setscrews, job done .. less than 10 dollars a pop. (well, lessthan 5
> pounds a pop as im In the UK and you divide by two to get dollars ;)
>
> --
> Redpoint Consulting Limited
>
> Real Solutions for a Virtual World
> http://www.redpoint.org.uk
Discussion Thread
Todd Meidinger
2004-01-08 10:59:49 UTC
Flexible Couplers on Retrofit?
Peter Renolds
2004-01-08 11:25:50 UTC
Re: [CAD_CAM_EDM_DRO] Flexible Couplers on Retrofit?
Steven Ciciora
2004-01-08 16:18:23 UTC
Re: [CAD_CAM_EDM_DRO] Flexible Couplers on Retrofit?
washcomp
2004-01-08 16:53:37 UTC
Re: Flexible Couplers on Retrofit?
Robin Szemeti
2004-01-08 20:29:54 UTC
Re: [CAD_CAM_EDM_DRO] Flexible Couplers on Retrofit?
jeffalanp
2004-01-09 09:40:14 UTC
Re: Flexible Couplers on Retrofit?