RE: [CAD_CAM_EDM_DRO] Re:Home Switches
Posted by
Todd Meidinger
on 2004-01-11 09:20:19 UTC
Do you have a good source for these roller lever switches?
-----Original Message-----
From: John Johnson [mailto:johnatl@...]
Sent: Sunday, January 11, 2004 10:44 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re:Home Switches
Could be backlash in the axis. You can check it with a dial indicator.
Also look for chips/dust on the microswitch lever and whatever actuates
it. I can repeatedly home my home-made router and get variances of less
than 0.001". I use roller lever microswitches.
Regards,
JJ
-----Original Message-----
From: John Johnson [mailto:johnatl@...]
Sent: Sunday, January 11, 2004 10:44 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re:Home Switches
Could be backlash in the axis. You can check it with a dial indicator.
Also look for chips/dust on the microswitch lever and whatever actuates
it. I can repeatedly home my home-made router and get variances of less
than 0.001". I use roller lever microswitches.
Regards,
JJ
On Saturday, January 10, 2004, at 11:15 PM, Dave Fisher wrote:
> On fitting home switches to our router table, I notice that each time
> I home the table - the X and Y readings differ greatly, some times
> upto + -
> 0.5 mm. Seldom never going to zero. Slowing the home traverse speed
> seems to
> make little difference.
>
> I would have expected there to be some differnces caused by backlash
> etc but
> not as much as I am getting.
>
> I have used good quality lever type micro switches, but wonder if I am
> suffering from switch bounce or just the mechanical properties of a
> micro
> switch. Would I be better using a slotted opto coupler to eliminate
> mechanical tolerences or any other method ?
>
> The table is being driven with Rutex Amps and The Desk CNC sofware and
> controller.
>
> Any advice would be appreciated
>
> Rgds to all
>
> Dave Fisher
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be
> a sister site to the CCED group, as many of the same members are
> there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
To unsubscribe from this group, send an email to:
CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Discussion Thread
Troy
2004-01-03 11:42:01 UTC
rack and pinion advice
balsaman_cnc
2004-01-03 12:51:26 UTC
Re: rack and pinion advice
Robert Campbell
2004-01-03 15:19:16 UTC
Re: [CAD_CAM_EDM_DRO] rack and pinion advice
JanRwl@A...
2004-01-03 18:47:49 UTC
Re: [CAD_CAM_EDM_DRO] rack and pinion advice
Erie Patsellis
2004-01-03 19:10:37 UTC
Re: [CAD_CAM_EDM_DRO] rack and pinion advice
ballendo
2004-01-03 20:09:15 UTC
Re: rack and pinion advice
Troy
2004-01-04 07:35:19 UTC
Re: rack and pinion advice
Dave Fisher
2004-01-10 20:15:43 UTC
RE: [CAD_CAM_EDM_DRO] Re:Home Switches
John Johnson
2004-01-11 08:44:05 UTC
Re: [CAD_CAM_EDM_DRO] Re:Home Switches
Todd Meidinger
2004-01-11 09:20:19 UTC
RE: [CAD_CAM_EDM_DRO] Re:Home Switches
Torsten
2004-01-11 11:30:31 UTC
Re:Home Switches
Dale Emery
2004-01-11 13:55:09 UTC
Re: [CAD_CAM_EDM_DRO] Re:Home Switches
cnczeus
2004-01-11 15:02:01 UTC
Re:Home Switches
industrialhobbies
2004-01-11 20:41:36 UTC
Re:Home Switches
Fred Smith
2004-01-11 20:41:51 UTC
Re:Home Switches
Dave Fisher
2004-01-11 21:54:32 UTC
RE: [CAD_CAM_EDM_DRO] Re:Home Switches
cnczeus
2004-01-12 16:20:11 UTC
Re:Home Switches