RE: [CAD_CAM_EDM_DRO] How to plug on 115 Vac router on 230 Vac ?

Buy a 2 KVA 2 to 1 step down transformer and wire it up to drop the 230 to
115. Make sure you get fuses for both sides so you don't burn down you
house.


Best,

Ed Gilbert

Gilbert Engineered Systems
632 Warrenton-Embro Road
Macon, NC 27551
252-257-0539

> -----Original Message-----
> From: whynot06110 [mailto:whynot06110@...]
> Sent: Monday, January 26, 2004 5:36 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] How to plug on 115 Vac router on 230 Vac ?
>
> I've find a used 115 Vac Porter Cable 3 1/4 HP 5 speed (but not buy
> for the moment) but I only have 230Vac plug at home.
> So how can I do to have 115 Vac from my 230 Vac ? I need 15 A under
> 115 Vac for my router ?
>
> Thanks
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>
> -------------------------------------
> This message has been scanned for viruses and
> dangerous content by NCOL.NET, and is believed to be clean.