CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] test servo motor,softwarefor lathe

Posted by brian reid
on 2004-02-04 15:41:52 UTC
Thankyou Terry for the promp reply Do you run the harrison from a BBC i maybe able to
get my hands on one but i dont have the software.
best regards
brian

Terry Owens <james@...> wrote:
Hi,

A brushed servo motor runs on DC, the voltage and power required for full
rpm will be on the motor plate. Identify the power leads and connect it to a
power supply, it will spin. The way to check the encoder is with a frequency
counter or scope.

Your BBC machine will have to be converted to PC unless you can get the
machine running as is. I have a Harrison built by the same company and when
I get a terminal break down I'll be doing the same thing.

Regards,

Terry


> can you test a servo motor after it has been removed from the machine
without stripping it down?(just to verify that it is working).
> also I have a Boxford cnc lathe 125ctl working except for software to run
from PC
> It has a ribbon cable that used to run from a BBC computer.this is urgent
Willing to pay
> brian reid
> Reid Engineering
> Dundee
> Scotland
> 01382 889990
> bbrreid@...


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/

To unsubscribe from this group, send an email to:
CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/



---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!

[Non-text portions of this message have been removed]

Discussion Thread

brian reid 2004-02-03 15:30:53 UTC test servo motor,softwarefor lathe Terry Owens 2004-02-03 17:03:00 UTC Re: [CAD_CAM_EDM_DRO] test servo motor,softwarefor lathe Les Newell 2004-02-04 01:19:31 UTC Re: [CAD_CAM_EDM_DRO] test servo motor,softwarefor lathe CV Desper 2004-02-04 05:40:32 UTC Help I.D. Heidenhain DRO scale "LS 473" brian reid 2004-02-04 14:28:35 UTC Re: [CAD_CAM_EDM_DRO] test servo motor,softwarefor lathe brian reid 2004-02-04 15:41:52 UTC Re: [CAD_CAM_EDM_DRO] test servo motor,softwarefor lathe Terry Owens 2004-02-04 22:03:25 UTC Re: [CAD_CAM_EDM_DRO] test servo motor,softwarefor lathe Terry Owens 2004-02-04 22:11:26 UTC Re: [CAD_CAM_EDM_DRO] Help I.D. Heidenhain DRO scale "LS 473" brian reid 2004-02-05 11:42:27 UTC Re: [CAD_CAM_EDM_DRO] test servo motor,softwarefor lathe