CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Question about VM 4 and Mach2

on 2004-02-12 09:41:15 UTC
Jeff,

You may want to post the question on the Mach1Mach2 yahoo group.

Art should have an answer about what Mach2 will accept.

Bob Campbell
http://www.campbelldesigns.com
Breakout Boards
VisualMill 5.0 basic
Stepper motors
Plasma Torch Height, THC 300 boards
----- Original Message -----
From: "Jeff Lionberger" <jjlionberger@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, February 12, 2004 6:15 AM
Subject: [CAD_CAM_EDM_DRO] Question about VM 4 and Mach2


> I just purchased Visual Mill and I have a minimill that I converted and am
> using Mach2. I would like to post from Visual Mill with arcs, but Mach2
> hangs when it gets to the arcs. I have tried several post processors and
I
> haven't had any success. If I output the arcs as line segments, then
things
> work, but the program is so much larger and takes longer to run. I
thought
> maybe it had something to do with tool compensation. I have tried posts
> that use R and IJK. Does anyone know what post processor will work best
or
> what my problem might be?
>
> Thanks,
> Jeff
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>

Discussion Thread

karl_l_townsend 2004-02-12 05:34:58 UTC resistor to test stepper pulses caudlet 2004-02-12 07:09:48 UTC Re: resistor to test stepper pulses Jeff Lionberger 2004-02-12 09:04:26 UTC Question about VM 4 and Mach2 Robert Campbell 2004-02-12 09:41:15 UTC Re: [CAD_CAM_EDM_DRO] Question about VM 4 and Mach2 tig415 2004-02-12 09:59:36 UTC Re: Question about VM 4 and Mach2 JanRwl@A... 2004-02-12 17:34:18 UTC Re: [CAD_CAM_EDM_DRO] resistor to test stepper pulses