Re: [CAD_CAM_EDM_DRO] Screw Driver

The head is above the thread in my screwfeeder. The screws need to be
dropped in the hole and screwed in.. or unscrewed/pulled out and put back in
if there is already one in there

thanks-Lee

----- Original Message -----
From: "alex" <telecom@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, February 18, 2004 10:38 AM
Subject: Re: [CAD_CAM_EDM_DRO] Screw Driver


> Lee,
> can you describe how screws are being oriented in a screwfeeder.
> Also , does screw have to be dropped in place and also tightened up or
> just dropped and left?
> Alex
>
> Lee Leathers wrote:
>
> >Hello, I am looking to add a mechanism to my cnc project to put screws
in a
> >whole.
> >I recently purchesed a screw feeder (
>
>http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2593462914&category=3148
3&sspagename=STRK%3AMEBWN%3AIT&rd=1 )
> >
> >and I was thinking of using an extra stepper motor to place screws in a
pre
> >existing 3/16 hole. This will have to all be done automatic (via
software
> >programming and the right hardware)...
> >oh yeah, also the kicker is, if there is already a screw in the hole, it
> >must remove it until the hole is ready to be closed again with the screw.
> >
> >Any suggestions past.. using a magnetic phillips head, would be much
> >appreciated :)
> >
> >thanks-Lee
> >
> >
> >
> >
> >
> >Addresses:
> >FAQ: http://www.ktmarketing.com/faq.html
> >FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> >Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> >URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> >OFF Topic POSTS: General Machining
> >If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> >http://www.metalworking.com/news_servers.html
> >
> >http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
> >
> >NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> >bill
> >List Mom
> >List Owner
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>