Re: [CAD_CAM_EDM_DRO] Screw Driver

Actually there are existing screwdrivers/feeders which shouldn't be that
hard to adapt.
www.jergensinc.com
Alex

alex wrote:

> Philips is not a best screw for this set up - socket would be more
> reliable. What is the size?
> Basically it can be done in several operations, IMO.
> 1. Unscrew all the screws.
> 2. Drop new screws into place.
> 3. Tighten screws.
> Alex
>
> Lee Leathers wrote:
>
>>The head is above the thread in my screwfeeder. The screws need to be
>>dropped in the hole and screwed in.. or unscrewed/pulled out and put back in
>>if there is already one in there
>>
>>thanks-Lee
>>----- Original Message -----
>>From: "alex" <telecom@...>
>>To: <CAD_CAM_EDM_DRO@yahoogroups.com>
>>Sent: Wednesday, February 18, 2004 10:38 AM
>>Subject: Re: [CAD_CAM_EDM_DRO] Screw Driver
>>
>>
>>
>>
>>>Lee,
>>>can you describe how screws are being oriented in a screwfeeder.
>>>Also , does screw have to be dropped in place and also tightened up or
>>>just dropped and left?
>>>Alex
>>>
>>>Lee Leathers wrote:
>>>
>>>
>>>
>>>>Hello, I am looking to add a mechanism to my cnc project to put screws
>>>>
>>>>
>>in a
>>
>>
>>>>whole.
>>>>I recently purchesed a screw feeder (
>>>>
>>>>
>>>http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2593462914&category=3148
>>>
>>>
>>3&sspagename=STRK%3AMEBWN%3AIT&rd=1 )
>>
>>
>>>>and I was thinking of using an extra stepper motor to place screws in a
>>>>
>>>>
>>pre
>>
>>
>>>>existing 3/16 hole. This will have to all be done automatic (via
>>>>
>>>>
>>software
>>
>>
>>>>programming and the right hardware)...
>>>>oh yeah, also the kicker is, if there is already a screw in the hole, it
>>>>must remove it until the hole is ready to be closed again with the screw.
>>>>
>>>>Any suggestions past.. using a magnetic phillips head, would be much
>>>>appreciated :)
>>>>
>>>>thanks-Lee
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>Addresses:
>>>>FAQ: http://www.ktmarketing.com/faq.html
>>>>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>>>>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>>>
>>>>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>>>>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>>>>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>>>>
>>>>
>>timg@...
>>
>>
>>>>Moderator: pentam@... indigo_red@... davemucha@...
>>>>
>>>>
>>[Moderators]
>>
>>
>>>>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>>>
>>>>OFF Topic POSTS: General Machining
>>>>If you wish to post on unlimited OT subjects goto:
>>>>
>>>>
>>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
>>you have trouble.
>>
>>
>>>>http://www.metalworking.com/news_servers.html
>>>>
>>>>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>>>>
>>>>
>>sister site to the CCED group, as many of the same members are there, for OT
>>subjects, that are not allowed on the CCED list.
>>
>>
>>>>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
>>>>
>>>>
>>DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>>
>>
>>>>bill
>>>>List Mom
>>>>List Owner
>>>>
>>>>
>>>>Yahoo! Groups Links
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>[Non-text portions of this message have been removed]
>>>
>>>
>>>
>>>Addresses:
>>>FAQ: http://www.ktmarketing.com/faq.html
>>>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>>>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>>
>>>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>>>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>>>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>>>
>>>
>>timg@...
>>
>>
>>>Moderator: pentam@... indigo_red@... davemucha@...
>>>
>>>
>>[Moderators]
>>
>>
>>>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>>
>>>OFF Topic POSTS: General Machining
>>>If you wish to post on unlimited OT subjects goto:
>>>
>>>
>>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
>>you have trouble.
>>
>>
>>>http://www.metalworking.com/news_servers.html
>>>
>>>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>>>
>>>
>>sister site to the CCED group, as many of the same members are there, for OT
>>subjects, that are not allowed on the CCED list.
>>
>>
>>>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
>>>
>>>
>>DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>>
>>
>>>bill
>>>List Mom
>>>List Owner
>>>
>>>
>>>Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>>Addresses:
>>FAQ: http://www.ktmarketing.com/faq.html
>>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>
>>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>>Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
>>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>
>>OFF Topic POSTS: General Machining
>>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>>http://www.metalworking.com/news_servers.html
>>
>>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>>
>>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>>bill
>>List Mom
>>List Owner
>>
>>
>>Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>>

[Non-text portions of this message have been removed]