RE: [CAD_CAM_EDM_DRO] Re: Power Supply for Gecko 320 and servo motors for 3 axis router
Posted by
Ed Gilbert
on 2004-02-19 23:38:56 UTC
Hi Gregory,
What type of machine are you running them on? When you de-accelerate an axis
the motor produces voltage back into the power supply, know as back EMF. A
DC motor whether servo on not is a generator when being turned by the load.
A switching supply will not like it when voltage is back induced into its
output. Makes smoke in most cases! (:/
Best,
Ed Gilbert
Gilbert Engineered Systems
632 Warrenton-Embro Road
Macon, NC 27551
252-257-0539
This message has been scanned for viruses and
dangerous content by NCOL.NET, and is believed to be clean.
What type of machine are you running them on? When you de-accelerate an axis
the motor produces voltage back into the power supply, know as back EMF. A
DC motor whether servo on not is a generator when being turned by the load.
A switching supply will not like it when voltage is back induced into its
output. Makes smoke in most cases! (:/
Best,
Ed Gilbert
Gilbert Engineered Systems
632 Warrenton-Embro Road
Macon, NC 27551
252-257-0539
> -----Original Message------------------------------------------
> From: Gregory Kamysz [mailto:smsupply@...]
> Sent: Thursday, February 19, 2004 10:02 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Re: Power Supply for Gecko 320 and servo
> motors for 3 axis router
>
> Is there any reason not to run Gecko 320's on a switching supply? I
> plan on adding at least 75,000uF of cap between the two. Is cost the
> main reason for linear supplies? If I set my current limits on the
> Geckos to never exceed the source current limit all should be well,
> shouldn't it?
>
> Gregory Kamysz
> Crystal Lake, IL
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
This message has been scanned for viruses and
dangerous content by NCOL.NET, and is believed to be clean.
Discussion Thread
plastiguy
2004-02-19 13:30:23 UTC
Power Supply for Gecko 320 and servo motors for 3 axis router
Roy J. Tellason
2004-02-19 13:52:27 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply for Gecko 320 and servo motors for 3 axis router
caudlet
2004-02-19 15:25:00 UTC
Re: Power Supply for Gecko 320 and servo motors for 3 axis router
Gregory Kamysz
2004-02-19 18:58:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply for Gecko 320 and servo motors for 3 axis router
bull2003winkle
2004-02-19 20:57:08 UTC
Re: Power Supply for Gecko 320 and servo motors for 3 axis router
Jon Elson
2004-02-19 21:36:18 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply for Gecko 320 and servo motors for 3 axis router
Jon Elson
2004-02-19 21:46:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply for Gecko 320 and servo motors for 3 axis router
Ed Gilbert
2004-02-19 23:38:56 UTC
RE: [CAD_CAM_EDM_DRO] Re: Power Supply for Gecko 320 and servo motors for 3 axis router
William Scalione
2004-02-20 08:24:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply for Gecko 320 and servo motors for 3 axis router
Jon Elson
2004-02-20 09:05:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply for Gecko 320 and servo motors for 3 axis router
Jon Elson
2004-02-20 09:50:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply for Gecko 320 and servo motors for 3 axis router
caudlet
2004-02-20 13:48:30 UTC
Re: Power Supply for Gecko 320 and servo motors for 3 axis router
Kim Lux
2004-02-20 18:51:04 UTC
CNC Probing secrets...
Jon Elson
2004-02-20 19:38:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply for Gecko 320 and servo motors for 3 axis router
Roy J. Tellason
2004-02-20 20:42:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply for Gecko 320 and servo motors for 3 axis router
Gregory Kamysz
2004-02-21 07:04:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply for Gecko 320 and servo motors for 3 axis router