Increased power to Gecko 201's
Posted by
Ron K
on 2004-02-28 13:32:52 UTC
Hi All
I have a question for the electronic minded in the group , I have a
Bridgeport clone about 20 years old it has 3.1 Volt 6.2 amp 1100 oz.
steppers on it and I'm running it with 3 Gecko 201's at 38 Volts ( full
load ), I just acquired a transformer that will give me 70 Volts dc. ( a
little higher than I hoped for )
What kind of increase in speed and or torque would this give me.
Thanks
Ron
I have a question for the electronic minded in the group , I have a
Bridgeport clone about 20 years old it has 3.1 Volt 6.2 amp 1100 oz.
steppers on it and I'm running it with 3 Gecko 201's at 38 Volts ( full
load ), I just acquired a transformer that will give me 70 Volts dc. ( a
little higher than I hoped for )
What kind of increase in speed and or torque would this give me.
Thanks
Ron
Discussion Thread
Ron K
2004-02-28 13:32:52 UTC
Increased power to Gecko 201's
caudlet
2004-02-28 16:50:56 UTC
Re: Increased power to Gecko 201's
Jon Elson
2004-02-28 22:34:22 UTC
Re: [CAD_CAM_EDM_DRO] Increased power to Gecko 201's
caudlet
2004-02-29 10:00:03 UTC
Re: Increased power to Gecko 201's
Jon Elson
2004-02-29 12:26:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Increased power to Gecko 201's
Ron K
2004-03-05 21:46:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Increased power to Gecko 201's
bull2002winkle
2004-03-06 08:13:44 UTC
Re: Increased power to Gecko 201's
ibewgypsie
2004-03-06 11:32:49 UTC
Re: Increased power to Gecko 201's
Ron K
2004-03-06 19:06:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Increased power to Gecko 201's
Ron K
2004-03-06 19:06:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Increased power to Gecko 201's
Jon Elson
2004-03-06 21:21:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Increased power to Gecko 201's
Jon Elson
2004-03-06 21:33:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Increased power to Gecko 201's