Re: camtronics driver

On my 5 amp controller I place everything in a 12X10X6 case . The fan was
mounted on the outside of the case and the transformers are located inside
the case. The transformers are on one side of the case and the drivers are
on the other. No problems with noise.
Dan
-----Original Message-----
From: Al Schoepp <aschoepp@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Wednesday, June 09, 1999 6:11 PM
Subject: [CAD_CAM_EDM_DRO] camtronics driver

>From: Al Schoepp <aschoepp@...>
>
>Just curious, I'm in the process of constructing on of Dan's 5A stepper
>drivers and was wondering if it's ok to put the transformer/power supply
>components in the same enclosure. I'm new to all of this stuff and was
>wondering if the AC current in the enclosure would end up creating a lot
>of noise that would affect the stepper driver operation.
>
>Thanks,
>Al
>
>------------------------------------------------------------------------
>Campaign 2000 is here!
>http://www.onelist.com
>Discuss your thoughts; get informed at ONElist. See our homepage.
>------------------------------------------------------------------------
>welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the

discussion of shop built systems in the above catagories.

>