Re: camtronics driver

For the box for the unit I'm building I talked to an electrician friend
of mine. He was able to round up a junction box for me, it is 12x12x6,
and is a very solidly constructed.

Al

Tim Goldstein wrote:

>
> From: "Tim Goldstein" <timg@...>
>
> Dan,
>
> Is the case you are using an off the shelf unit or do you make it? I hunted
> all over and the only enclosure I could find that was at least that big was
> designed to mount in a 19" rack unit and cost around $120. I ended up making
> my own case out of masonite with a particle board base.
>
> Tim
> [Denver, CO]
>
> > -----Original Message-----
> > From: Dan Mauch [mailto:dmauch@...]
> > Sent: Thursday, June 10, 1999 6:46 AM
> > To: CAD_CAM_EDM_DRO@onelist.com
> > Subject: Re: [CAD_CAM_EDM_DRO] camtronics driver
> >
> >
> > From: "Dan Mauch" <dmauch@...>
> >
> > On my 5 amp controller I place everything in a 12X10X6 case . The fan was
> > mounted on the outside of the case and the transformers are located inside
> > the case. The transformers are on one side of the case and the drivers are
> > on the other. No problems with noise.
> > Dan
> > -----Original Message-----
> > From: Al Schoepp <aschoepp@...>
> > To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
> > Date: Wednesday, June 09, 1999 6:11 PM
> > Subject: [CAD_CAM_EDM_DRO] camtronics driver
> >
> >
> > >From: Al Schoepp <aschoepp@...>
> > >
> > >Just curious, I'm in the process of constructing on of Dan's 5A stepper
> > >drivers and was wondering if it's ok to put the transformer/power supply
> > >components in the same enclosure. I'm new to all of this stuff and was
> > >wondering if the AC current in the enclosure would end up creating a lot
> > >of noise that would affect the stepper driver operation.
> > >
> > >Thanks,
> > >Al
> > >
> > >------------------------------------------------------------------------
> > >Campaign 2000 is here!
> > >http://www.onelist.com
> > >Discuss your thoughts; get informed at ONElist. See our homepage.
> > >------------------------------------------------------------------------
> > >welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the
> > discussion of shop built systems in the above catagories.
> > >
> >
> >
> > ------------------------------------------------------------------------
> > What do lizards and rock music have in common?
> > http://www.onelist.com
> > They both have communities at ONElist. Find yours today!
> > ------------------------------------------------------------------------
> > welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for
> > the discussion of shop built systems in the above catagories.
> >
>
> ------------------------------------------------------------------------
> With more than 20 million e-mails exchanged daily...
> http://www.onelist.com
> ...ONElist is home to the liveliest discussions on the Internet!
> ------------------------------------------------------------------------
> welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the discussion of shop built systems in the above catagories.
> To Unsubscribe:
> http://www.onelist.com/unsubscribe/CAD_CAM_EDM_DRO
> bill, List Manager