CAD CAM EDM DRO - Yahoo Group Archive

Re: Cheap DC servos for a Sherline/10,000RPM sherline spindle

Posted by Fred Smith
on 2004-03-26 09:50:44 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Peter Renolds <prenolds@s...>
wrote:
> Hi Fred,
>
> I checked the Pittman website and got some info on the motor you
are
> suggesting - yours appear to have a gearbox on the front? What
gear
> ratio? Are yours fitted with a 500 count encoder? TIA. I have
another
> application in mind and need a small (relatively) low speed servo
motor.

Peter, the motor is nearly identical to the S015 (same 5.9:1 gearbox,
other mechanicals the same), with the following differences:

Rated for 30 volts vs 24
Square mtg plate instead of face mount
Encoder is 512 line, HEDS

Fred Smith - IMService

Discussion Thread

Abby Katt 2004-03-26 04:01:07 UTC Cheap DC servos for a Sherline/10,000RPM sherline spindle Fred Smith 2004-03-26 06:03:28 UTC Re: Cheap DC servos for a Sherline/10,000RPM sherline spindle ballendo 2004-03-26 06:03:34 UTC Re: Cheap DC servos for a Sherline/10,000RPM sherline spindle Peter Renolds 2004-03-26 08:23:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Cheap DC servos for a Sherline/10,000RPM sherline spindle Fred Smith 2004-03-26 09:50:44 UTC Re: Cheap DC servos for a Sherline/10,000RPM sherline spindle