Re: Help in selecting software please.

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "stickymike23"
<mikestein@p...> wrote:

> I have an RB20 mill which I have fitted steppers to. Today I have
> ordered a couple of Gecko stepper drivers. Now I have to make the
> biggest decision, what software. So far I have found Mach2 and
> Kellycam. The pc I have may limit things as its only a p100 with 32
> RAM.

DeskCNC will run on a Win98 PC (later versions of Windows too). At
the last NAMES in April, we had it running a servo CNC router at 160
ipm with a Pentium pro 200, and 32 meg of ram.

The hardware controller rate is 40,000 plus sps. Since it also
includes a full blown CAM for writing programs for pocketing,
contouring and drilling, 3D surfaces, PCB's, and image files, and an
automated surface probing to .stl file routine, it is probably your
best buy.

Fred Smith - IMService
$75 Spring Cam software sale is still on
http://www.cadcamcadcam.com/hobby