CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Stepper Motor cable sizes and types

Posted by Dave Rigotti
on 2004-07-29 18:59:29 UTC
This might shed some light on this...

http://www.alphawire.com/PAGES/383.CFM

Regards,
Dave Rigotti
HobbyCNC.com


----- Original Message -----
From: "Roy J. Tellason" <rtellason@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, July 29, 2004 9:56 PM
Subject: Re: [CAD_CAM_EDM_DRO] Stepper Motor cable sizes and types


> On Thursday 29 July 2004 09:53 pm, Tad Johnson wrote:
> > Hi Folks,
> >
> > Just wanted to see if anyone had any input on the following.
> > We are about to start installing our steppers and were going
> > to use 10 conductor 22 gauge wire and double the conductors
> > up for the motor windings.
> >
> > The drives are Vexta 187 oz/in. 3amp per phase. Any input?
>
> Yeah.
>
> How much of a difference the wire size is going to make depends on how
long
> the wires are.
>
> Though 22ga. x 2 does sound a little on the light side to me...
>
> Somewhere I have a chart that gives resistance of various sizes of wire --
> it's likely that such a thing exists out there on the net as well. Might
be
> handy to make these decisions with.
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>

Discussion Thread

Lance Hopper 2004-07-29 18:38:33 UTC VFD and inverter duty 3phase motors Tad Johnson 2004-07-29 18:50:29 UTC Stepper Motor cable sizes and types Roy J. Tellason 2004-07-29 18:57:24 UTC Re: [CAD_CAM_EDM_DRO] Stepper Motor cable sizes and types Dave Rigotti 2004-07-29 18:59:29 UTC Re: [CAD_CAM_EDM_DRO] Stepper Motor cable sizes and types JanRwl@A... 2004-07-29 19:19:37 UTC Re: [CAD_CAM_EDM_DRO] VFD and inverter duty 3phase motors JanRwl@A... 2004-07-29 19:22:19 UTC Re: [CAD_CAM_EDM_DRO] Stepper Motor cable sizes and types JanRwl@A... 2004-07-29 20:12:56 UTC Re: [CAD_CAM_EDM_DRO] Stepper Motor cable sizes and types Tad Johnson 2004-07-29 21:35:59 UTC Re: [CAD_CAM_EDM_DRO] Stepper Motor cable sizes and types Tad Johnson 2004-07-29 21:44:05 UTC Re: [CAD_CAM_EDM_DRO] Stepper Motor cable sizes and types Jon Elson 2004-07-29 22:14:28 UTC Re: [CAD_CAM_EDM_DRO] VFD and inverter duty 3phase motors doug98105 2004-07-30 06:53:14 UTC Re: VFD and inverter duty 3phase motors cnc002@a... 2004-07-30 09:15:11 UTC Re: [CAD_CAM_EDM_DRO] VFD and inverter duty 3phase motors doug98105 2004-07-30 21:13:40 UTC Re: VFD and inverter duty 3phase motors JanRwl@A... 2004-07-30 21:36:13 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD and inverter duty 3phase motors Dan Quinn 2004-07-31 06:19:00 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD and inverter duty 3phase motors cnc002@a... 2004-07-31 08:22:11 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD and inverter duty 3phase motors Greg Jackson 2004-07-31 09:41:48 UTC RE: [CAD_CAM_EDM_DRO] Re: VFD and inverter duty 3phase motors Greg Jackson 2004-07-31 09:51:16 UTC RE: [CAD_CAM_EDM_DRO] VFD and inverter duty 3phase motors Dan Mauch 2004-07-31 13:19:58 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD and inverter duty 3phase motors Jon Elson 2004-07-31 14:00:31 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD and inverter duty 3phase motors Lance Hopper 2004-08-01 06:28:31 UTC Re: VFD and inverter duty 3phase motors cnc002@a... 2004-08-01 08:11:04 UTC Re: [CAD_CAM_EDM_DRO] VFD and inverter duty 3phase motors cnc002@a... 2004-08-01 08:16:50 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD and inverter duty 3phase motors