CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics)

Posted by Vince Negrete
on 2004-08-03 07:22:51 UTC
I sooo want one! :)
Have an IR 1/4W diode Pump style LightWave Laser I pulled from a
SemiConductor Laser Trimmer (Nikon) but it can only cut a max size of 10
microns. ha!
Want to get hold of a nice Cutting size like you have there.!
Someday I'll get lucky. :)

Vince

----- Original Message -----
From: "skykotech" <rick@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, August 02, 2004 11:26 PM
Subject: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics)


> CAD_CAM_EDM_DRO
> ^
> LASER :-)
>
> I just added an attachment to my cnc mill. It is a 10 watt Synrad
> CO2 laser (doing about 17 watts, go figure). I got it for free from
> a semiconductor marking machine that was tossed in the dump. The
> lens is a 1 inch dia. 3 inch F.L. ZnSe curtesy of ebay ($25). I am
> not really positive it was required to mount the lens as far from the
> co2 laser as I did (about 20 inches) but I read that the beam from a
> Synrad laser is square in profile at exit and becomes round and
> gaussian at about .6 meters from the laser output. Anyway, it seems
> to work O.K. In the pics I cut 1/8" basswood at 60IPM, black felt at
> 120IPM, 1/8" acrylic at 40IPM, 1/8" spongy foam at 100IPM, and 1/4"
> acrylic in 2 passes at 30IPM. I am using dry shop air at about 20
> PSI into the lens/nozzle assembly I machined on the same mill. I
> used a ring of Indium wire to form a seal/cushion for the lens
> (overkill?). I tried using nitrogen, but didn't see much difference
> than air (and I saw my nice bottle of 2500 PSI 99.999% N2 dropping
> all too rapidly :-)
>
> Right now I am just hitting a footswitch when I want the laser to
> come on (couldn't wait and just had to see it cut something). My
> mill runs EMC and I am going to get a second parallel port and use
> I/O from it to turn the laser on/off. What would be a good thing to
> use? Does coolant on/off have latency?
>
> Also, I know about the toxic fumes from some plastics and am staying
> away from them until/unless I get a fume extractor. I am mostly
> cutting thin wood and paper. I designed this so I can take it on/off
> the mill in about 5 min. (it bolts to the head of the bedmill). I
> always wear plastic safety goggles which are perfect for blocking
> 100% of the 10,600nm wavelength of CO2. Also, as you can see in the
> photo, I have encased the beam inside a metal tube all the way to the
> lens, which is a short focal length. If the focused beam somehow
> gets reflected, it will be diverging rapidly and would not have
> enough energy density to set anything on fire. I might put a
> plexiglass shield around the lens head.
>
> Anyway, here are the pics of my $25 CO2 laser engraver/cutter:
>
> http://www.skyko.com/shizlaser/shizlas1.JPG
>
> http://www.skyko.com/shizlaser/shizlas2.JPG
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Discussion Thread

skykotech 2004-08-02 23:26:05 UTC added laser cutter to my mill (pics) Bob Muse 2004-08-02 23:45:46 UTC Re: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics) ab2pn 2004-08-03 06:56:44 UTC Re: added laser cutter to my mill (pics) Vince Negrete 2004-08-03 07:22:51 UTC Re: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics) Todd W. Syssa 2004-08-03 07:29:01 UTC Re: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics) Vince Negrete 2004-08-03 07:31:05 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) skykotech 2004-08-03 07:35:16 UTC Re: added laser cutter to my mill (pics) Vince Negrete 2004-08-03 07:38:47 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) skykotech 2004-08-03 07:40:14 UTC Re: added laser cutter to my mill (pics) Todd W. Syssa 2004-08-03 08:13:17 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) skykotech 2004-08-03 08:19:08 UTC Re: added laser cutter to my mill (pics) Mike Kunz 2004-08-03 08:43:01 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) skykotech 2004-08-03 09:00:19 UTC Re: added laser cutter to my mill (pics) Jon Elson 2004-08-03 09:57:42 UTC Re: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics) Mike Kunz 2004-08-03 10:17:47 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) Todd W. Syssa 2004-08-03 12:01:03 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) Cristian 2004-08-03 14:15:08 UTC Re: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics) luvindaddy@y... 2004-08-03 15:04:18 UTC Re: added laser cutter to my mill (pics) Jon Elson 2004-08-03 20:15:13 UTC Re: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics) skykotech 2004-08-04 11:05:07 UTC Re: added laser cutter to my mill (pics) Bob Muse 2004-08-04 12:04:02 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) skykotech 2004-08-04 12:13:50 UTC Re: added laser cutter to my mill (pics) Alan Marconett 2004-08-04 12:50:30 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) skykotech 2004-08-04 14:21:55 UTC Re: added laser cutter to my mill (pics) Alan Marconett 2004-08-04 15:06:29 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) Fred Smith 2004-08-04 16:59:09 UTC Re: added laser cutter to my mill (pics) Jon Elson 2004-08-04 19:59:32 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) Jon Elson 2004-08-04 20:14:27 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) Stephen Wille Padnos 2004-08-04 20:16:28 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) Tom Hubin 2004-08-04 22:18:43 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) Tom Hubin 2004-08-04 23:06:35 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) skykotech 2004-08-05 09:03:32 UTC Re: added laser cutter to my mill (pics) skykotech 2004-08-05 09:20:14 UTC Re: added laser cutter to my mill (pics) skykotech 2004-08-05 09:25:22 UTC Re: added laser cutter to my mill (pics) Tom Hubin 2004-08-05 09:52:23 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) wanliker@a... 2004-08-05 13:45:32 UTC Re: added laser cutter to my mill (pics) Graham Stabler 2004-08-05 17:54:36 UTC Re: added laser cutter to my mill (pics) skykotech 2004-08-05 18:17:45 UTC Re: added laser cutter to my mill (pics) andyolney 2004-08-05 22:11:53 UTC Re: added laser cutter to my mill (pics) Graham Stabler 2004-08-06 02:58:54 UTC Re: added laser cutter to my mill (pics) Jon Elson 2004-08-06 10:37:37 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) Tom Hubin 2004-08-07 16:58:22 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics) Tom Hubin 2004-08-09 10:31:35 UTC Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)