Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
Posted by
Stephen Wille Padnos
on 2004-08-04 20:16:28 UTC
Even better:
So that you can choose between spindle and laser, use an aux output as a
gate for the spindle to turn on the laser.
ie, your AVR micro turns on the laser if the aux output is on, and the
spindle gets turned on. You add the aux out on and aux out off codes at
the beginning and end of programs for the laser.
- Steve
Alan Marconett wrote:
So that you can choose between spindle and laser, use an aux output as a
gate for the spindle to turn on the laser.
ie, your AVR micro turns on the laser if the aux output is on, and the
spindle gets turned on. You add the aux out on and aux out off codes at
the beginning and end of programs for the laser.
- Steve
Alan Marconett wrote:
>guys,
>
>Why not just use the spindle on/off codes? an SSS (solid state switch)
>can be driven (active low) by a line from the printer port. I currently
>(ha!) use spindle control on my machines, M03 M05 does it!
>
>Alan KM6VV
>
Discussion Thread
skykotech
2004-08-02 23:26:05 UTC
added laser cutter to my mill (pics)
Bob Muse
2004-08-02 23:45:46 UTC
Re: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics)
ab2pn
2004-08-03 06:56:44 UTC
Re: added laser cutter to my mill (pics)
Vince Negrete
2004-08-03 07:22:51 UTC
Re: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics)
Todd W. Syssa
2004-08-03 07:29:01 UTC
Re: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics)
Vince Negrete
2004-08-03 07:31:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
skykotech
2004-08-03 07:35:16 UTC
Re: added laser cutter to my mill (pics)
Vince Negrete
2004-08-03 07:38:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
skykotech
2004-08-03 07:40:14 UTC
Re: added laser cutter to my mill (pics)
Todd W. Syssa
2004-08-03 08:13:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
skykotech
2004-08-03 08:19:08 UTC
Re: added laser cutter to my mill (pics)
Mike Kunz
2004-08-03 08:43:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
skykotech
2004-08-03 09:00:19 UTC
Re: added laser cutter to my mill (pics)
Jon Elson
2004-08-03 09:57:42 UTC
Re: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics)
Mike Kunz
2004-08-03 10:17:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
Todd W. Syssa
2004-08-03 12:01:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
Cristian
2004-08-03 14:15:08 UTC
Re: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics)
luvindaddy@y...
2004-08-03 15:04:18 UTC
Re: added laser cutter to my mill (pics)
Jon Elson
2004-08-03 20:15:13 UTC
Re: [CAD_CAM_EDM_DRO] added laser cutter to my mill (pics)
skykotech
2004-08-04 11:05:07 UTC
Re: added laser cutter to my mill (pics)
Bob Muse
2004-08-04 12:04:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
skykotech
2004-08-04 12:13:50 UTC
Re: added laser cutter to my mill (pics)
Alan Marconett
2004-08-04 12:50:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
skykotech
2004-08-04 14:21:55 UTC
Re: added laser cutter to my mill (pics)
Alan Marconett
2004-08-04 15:06:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
Fred Smith
2004-08-04 16:59:09 UTC
Re: added laser cutter to my mill (pics)
Jon Elson
2004-08-04 19:59:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
Jon Elson
2004-08-04 20:14:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
Stephen Wille Padnos
2004-08-04 20:16:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
Tom Hubin
2004-08-04 22:18:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
Tom Hubin
2004-08-04 23:06:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
skykotech
2004-08-05 09:03:32 UTC
Re: added laser cutter to my mill (pics)
skykotech
2004-08-05 09:20:14 UTC
Re: added laser cutter to my mill (pics)
skykotech
2004-08-05 09:25:22 UTC
Re: added laser cutter to my mill (pics)
Tom Hubin
2004-08-05 09:52:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
wanliker@a...
2004-08-05 13:45:32 UTC
Re: added laser cutter to my mill (pics)
Graham Stabler
2004-08-05 17:54:36 UTC
Re: added laser cutter to my mill (pics)
skykotech
2004-08-05 18:17:45 UTC
Re: added laser cutter to my mill (pics)
andyolney
2004-08-05 22:11:53 UTC
Re: added laser cutter to my mill (pics)
Graham Stabler
2004-08-06 02:58:54 UTC
Re: added laser cutter to my mill (pics)
Jon Elson
2004-08-06 10:37:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
Tom Hubin
2004-08-07 16:58:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)
Tom Hubin
2004-08-09 10:31:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: added laser cutter to my mill (pics)