Re: [CAD_CAM_EDM_DRO] Re: servo brake problem

----- Original Message -----
From: "Doug Chartier" <doug@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, August 28, 2004 2:24 AM
Subject: Re: [CAD_CAM_EDM_DRO] Re: servo brake problem


> At 01:31 AM 8/28/2004, you wrote:
> >Still got the axis motor wiring problem in another
> >question to tackle. I think I will eventually get to the bottom of
> >all this with a lot of help from my new CAD-CAM-EDM-DRO friends!
>
>
> A bit more info that I just remembered.
>
> The times the spindle motor would not turn - when the air pressure was low
> or non existent - the inverter that runs the spindle motor tripped
> out. Since the inverter and the controller including the solenoids are on
> completely different circuits, that tells me the brake is ENGAGED, thus
> causing the inverter to overload when trying to start the spindle motor
> causing it to trip.
>
> If this is true, the fact that your spindle motor will not turn may have
> nothing to do with the motor or the wiring. Getting the brake disengaged
> may solve all your problems.
>
> Another guess - is it possible the brake solenoid is wired backwards so it
> provides air pressure when the pressure is supposed to be released?
>
> Doug C.
> Houston, Tex.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>