CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Question on hobby retrofit of TNC150 control

Posted by Dan Mauch
on 2004-10-10 05:53:09 UTC
That set up with some of the leads going both to the servo amp and cpu is
pretty much what my old set up was.
I bet if you called that number I gave you on Monday they would have the
connections for your particular controls.
Dan
,
>
> I'll have to take a closer look to see exactly what the connections are.
> The wires I mention looked to me like they came from the control. There
> are two sets of three wires that come from the encoders and tachs. Not
> sure exactly how that's wired...
> Wires come from tachs/encoders to a small board where the signals appear
> to be split and go to both the amps and the CPU.
>
> I'll go back Monday and take a pic and post a link to it, a picture
> being worth a lot more than my guesswork descriptions. If it looks like
> your setup, a scan would be much appreciated!
>
> He had the full manuals when he bought the machine. Took them with him
> on vacation last year. In a light rain, they hit a slick spot and went
> over a cliff. Their truck was stopped by the only tree for hundreds of
> yards but the trailer, with manuals, went all the way and nothing was
> recovered. Bummer to lose the manuals, but it could have been worse!
>
> Thanks,
>
> Jon
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

Discussion Thread

Jon Anderson 2004-10-09 12:30:18 UTC Question on hobby retrofit of TNC150 control Dan Mauch 2004-10-09 14:33:50 UTC Re: [CAD_CAM_EDM_DRO] Question on hobby retrofit of TNC150 control Jon Anderson 2004-10-09 14:59:08 UTC Re: [CAD_CAM_EDM_DRO] Question on hobby retrofit of TNC150 control Dan Mauch 2004-10-10 05:53:09 UTC Re: [CAD_CAM_EDM_DRO] Question on hobby retrofit of TNC150 control