RE: [CAD_CAM_EDM_DRO] Re: sourcing motion control parts - steel vs aluminum

:)
Hal, lets look very carefully on your result of calculation
this is the same as my conclusion but in different units (my was in SI unit system)
Dont worry (there are no any mistake)
Rerards
Mat

Hal Eckhart <hal@...> wrote:

On 10/25/04 6:23 PM, Leslie Watts wrote:

>Aluminum and steel are virtually identical in specific stiffness.

I don't think that's true. The modulus of elasticity for steel is
29,700,000 psi and it's 10,000,000 psi for aluminum (this will vary
based on type and temper, but it's the best info I can find). For
example, a 2" square steel tube with a 1/8" wall would deflect 0.11"
with 100# load in the middle of an 8' run. For aluminum, it would
deflect 0.33".

This info is from the cheesy calculator I hacked together at
.

If you want to quarrel with my conclusions, I've posted my sources
there. I am NOT an expert on this, although I do bend a lot of metal.
And my limited testing seems to support the accuracy of the calculator.
But I'm certainly open to other ideas.

And one note about 8020. I've used it, although I wouldn't recommend it
for framing (for a hobbyist). Unless you're going to be reconfiguring
it later, it's awfully pricy. However, they do sell a slick little
sliding dohickey for it that seems like it would work fine for a plasma
Y axis.

Hal Eckhart - Casa Forge - Minneapolis MN -


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links









---------------------------------
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.

[Non-text portions of this message have been removed]