CAD CAM EDM DRO - Yahoo Group Archive

Re: gecko burned again ?oil dripping on the motor..

Posted by Keith Clark
on 2004-11-08 19:08:20 UTC
Thanks Jon I will pull the motor and see where the oil has gone
without taking it apart.
Keith

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...> wrote:
> Keith Clark wrote:
>
> >In the process of inspecting the problem on the y axis I noticed
> >that the y axis motor sits directly under the ball screw with oil
> >dripping down onto the wires and the motor. Is it possible that
the
> >oil could get inside the motor or down the wires onto the
> >connections and cause a short? If there is oil internally is the
> >motor possibly damaged?
> >
> >
> Normally, motor winding insulation is a form of varnish. It is
somewhat
> oil soluble! I can't say about your specific motors, but in
general, oil
> in motor windings is extremely bad. I have had some ordinary
electric
> motors ruined by oil in the windings. If the windings are
encapsulated
> in epoxy, they should be safe. If the oil can get in to the
varnish on the
> wires, it could definitely ruin them.
>
> Jon

Discussion Thread

Keith Clark 2004-11-07 06:57:15 UTC gecko burned again R Rogers 2004-11-07 07:16:57 UTC Re: [CAD_CAM_EDM_DRO] gecko burned again john labutski 2004-11-07 07:30:34 UTC Re: [CAD_CAM_EDM_DRO] gecko burned again Keith Clark 2004-11-07 10:24:28 UTC Re: gecko burned again Jon Elson 2004-11-07 10:26:23 UTC Re: [CAD_CAM_EDM_DRO] gecko burned again Keith Clark 2004-11-07 10:26:25 UTC Re: gecko burned again john labutski 2004-11-07 10:58:34 UTC Re: [CAD_CAM_EDM_DRO] gecko burned again Greg Jackson 2004-11-07 11:34:09 UTC RE: [CAD_CAM_EDM_DRO] Re: gecko burned again Keith Clark 2004-11-07 13:06:37 UTC Re: gecko burned again Keith Clark 2004-11-07 13:09:09 UTC Re: gecko burned again Keith Clark 2004-11-07 16:16:02 UTC Re: gecko burned again ?oil dripping on the motor.. Dave Fisher 2004-11-07 16:27:42 UTC RE: [CAD_CAM_EDM_DRO] Re: gecko burned again ?oil dripping on the motor.. Dave Fisher 2004-11-07 16:37:30 UTC RE: [CAD_CAM_EDM_DRO] Re: gecko burned again ?oil dripping on the motor.. john labutski 2004-11-07 16:38:16 UTC Re: [CAD_CAM_EDM_DRO] Re: gecko burned again ?oil dripping on the motor.. Mariss Freimanis 2004-11-07 16:52:40 UTC Re: gecko burned again Mariss Freimanis 2004-11-07 17:15:39 UTC Re: gecko burned again ?oil dripping on the motor.. Ron Kline 2004-11-07 17:55:13 UTC Re: [CAD_CAM_EDM_DRO] gecko burned again Keith Clark 2004-11-07 18:20:11 UTC Re: gecko burned again Vince Negrete 2004-11-07 18:44:51 UTC Re: [CAD_CAM_EDM_DRO] Re: gecko burned again turboking@j... 2004-11-07 19:13:48 UTC Re: [CAD_CAM_EDM_DRO] gecko burned again Mariss Freimanis 2004-11-07 19:58:37 UTC Re: gecko burned again Jon Elson 2004-11-07 20:47:31 UTC Re: [CAD_CAM_EDM_DRO] Re: gecko burned again Jon Elson 2004-11-07 21:12:28 UTC Re: [CAD_CAM_EDM_DRO] Re: gecko burned again ?oil dripping on the motor.. Keith Clark 2004-11-08 19:08:20 UTC Re: gecko burned again ?oil dripping on the motor..