CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC probe- Help!

Posted by wthomas@g...
on 2004-11-28 23:06:18 UTC
Hi Andy & all:
Do you really need the 5 th axies cnc controled or could you
just tilt the head on an angle so you can reach in between the vanes
with the end of the ball noses cutter. You might be able to do it
with only a 3 axies machine but it would really be something to
program and machine as you would be always doing what we in the
machining trade call rise and fall machining not water line type
which is much easier.
Another way to get the contour would be to make a single blade
model of a larger scale and then trace it with a probe. This is
one reason I asked about a probe and how it works to generate code
earlier. Does any one know how the control gets the feed back when
the probe is a zero position? What type of signal do the probes
output? Does anyone know? I have a friend who has a machine that
the makers said it was capable of using a probe and I need to find
out more about using one.
GOD'S BLESSINGS
Bill

To: <CAD_CAM_EDM_DRO@yahoogroups.com>
From: "Rajasingham., A. \"Indi\"" <Indi@...>
Date sent: Sun, 28 Nov 2004 22:56:52 -0500
Subject: RE: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC - Help!
Send reply to: CAD_CAM_EDM_DRO@yahoogroups.com

[ Double-click this line for list subscription options ]



Thanks Ken.
What about the quality of the base machine Rong Fu vs the clones?
Suggestions please for CNC that can do the tilt head - 5th axis? As well
Do RF 45s come with 2HP? Is retrofit possilbe with 2HP ?
Best wishes, Andy

-----Original Message-----
From: Kenneth A. Emmert [mailto:mds1878@...]
Sent: Sunday, November 28, 2004 10:14 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC - Help!





-----Original Message-----
From: Kenneth A. Emmert [mailto:Kenneth@...]
Sent: Sunday, November 28, 2004 7:12 PM
To: 'CAD_CAM_EDM_DRO@yahoogroups.com'
Subject: RE: Rong Fu RF 45 vs RF 31 CNC - Help!

I am trying to decide between the RongFu RF45 and RF31 with CNC.

Could anyone guide me on this?

Some of the issues are:

1. Good CNC matched systems - Servos controllers boards and software. I
know that Microkinetics makes one for the RF 31.

2. RF45 has 1HP rather than the 2HP of the RF 31. However it has
dovetails, a gearhead and a tilting head. Is the 1HP too low for such a
machine? For steel ? Is CNC control available for the tilting head (5th
axis?)?

Thanks.
Andy

Andy,

It is much easier to CNC an RF45 take a look at
www.industrialhobbies.com . You are likely looking at the Grizzley model
at 1hp there are many others selling 1.5 hp models. Do not buy an
actual RongFu purchase a Chinese clone instead. You will be stripping
most of differences out with a CNC conversion.
I paid 1395.00 for an RF45 clone including shipping in October!

Ken



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner


Yahoo! Groups Links











Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

Rick Chownyk 2004-11-26 20:55:55 UTC Loooking for cnc project book? dxf, g-code? Tom Hubin 2004-11-26 21:40:34 UTC Re: [CAD_CAM_EDM_DRO] Loooking for cnc project book? dxf, g-code? Stephen Wille Padnos 2004-11-26 21:48:22 UTC Re: [CAD_CAM_EDM_DRO] Loooking for cnc project book? dxf, g-code? Tom Hubin 2004-11-26 23:12:14 UTC Re: [CAD_CAM_EDM_DRO] Loooking for cnc project book? dxf, g-code? wthomas@g... 2004-11-27 04:16:58 UTC Re: [CAD_CAM_EDM_DRO] Loooking for cnc project book? dxf, g-code? Andy Wander 2004-11-27 05:44:42 UTC RE: [CAD_CAM_EDM_DRO] Loooking for cnc project book? dxf, g-code? Ron Kline 2004-11-27 06:49:33 UTC Re: [CAD_CAM_EDM_DRO] Loooking for cnc project book? dxf, g-code? Nico Verduin 2004-11-27 07:02:51 UTC RE: [CAD_CAM_EDM_DRO] Loooking for cnc project book? dxf, g-code? Rick Chownyk 2004-11-27 07:44:02 UTC Re: Loooking for cnc project book? dxf, g-code? turbulatordude 2004-11-27 08:34:25 UTC Re: Loooking for cnc project book? dxf, g-code? Rick Chownyk 2004-11-27 08:40:36 UTC Re: Loooking for cnc project book? dxf, g-code? Alan Marconett 2004-11-27 09:37:18 UTC Re: [CAD_CAM_EDM_DRO] Loooking for cnc project book? dxf, g-code? turbulatordude 2004-11-27 10:35:54 UTC Re: Loooking for cnc project book? dxf, g-code? Tom Hubin 2004-11-27 11:05:52 UTC Re: [CAD_CAM_EDM_DRO] Loooking for cnc project book? dxf, g-code? Tom Hubin 2004-11-27 11:15:07 UTC Re: [CAD_CAM_EDM_DRO] Loooking for cnc project book? dxf, g-code? Tom Hubin 2004-11-27 11:28:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Loooking for cnc project book? dxf, g-code? Tom Hubin 2004-11-27 11:36:51 UTC Re: [CAD_CAM_EDM_DRO] Loooking for cnc project book? dxf, g-code? Alan Marconett 2004-11-27 12:03:53 UTC Re: [CAD_CAM_EDM_DRO] Loooking for cnc project book? dxf, g-code? Jon Elson 2004-11-27 13:52:43 UTC Re: [CAD_CAM_EDM_DRO] Loooking for cnc project book? dxf, g-code? turbulatordude 2004-11-27 21:04:13 UTC Re: Loooking for cnc project book? dxf, g-code? OFF TOPIC Ron Kline 2004-11-28 06:15:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Loooking for cnc project book? dxf, g-code? OFF TOPIC Rajasingham., A. "Indi" 2004-11-28 10:07:17 UTC Rong Fu RF 45 vs RF 31 CNC - Help! Alan Marconett 2004-11-28 14:42:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Loooking for cnc project book? dxf, g-code? OFF TOPIC Tom Hubin 2004-11-28 15:02:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Loooking for cnc project book? dxf, g-code? R Rogers 2004-11-28 17:26:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Loooking for cnc project book? dxf, g-code? Kenneth A. Emmert 2004-11-28 19:27:57 UTC RE: Rong Fu RF 45 vs RF 31 CNC - Help! Rajasingham., A. "Indi" 2004-11-28 20:28:47 UTC RE: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC - Help! wthomas@g... 2004-11-28 23:06:18 UTC RE: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC probe- Help! Joel 2004-11-29 09:05:02 UTC Re: Rong Fu RF 45 vs RF 31 CNC - Help! Alan Marconett 2004-11-29 09:41:30 UTC Re: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC - Help! Rajasingham., A. "Indi" 2004-11-29 09:47:55 UTC RE: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC probe- Help! Alan Marconett 2004-11-29 10:37:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Rong Fu RF 45 vs RF 31 CNC - Help! Henrik Olsson 2004-11-29 11:04:35 UTC Re: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC probe- Help! vrsculptor 2004-11-29 11:23:27 UTC Re: Rong Fu RF 45 vs RF 31 CNC probe 5-Axis Joel 2004-11-29 11:33:26 UTC Re: Rong Fu RF 45 vs RF 31 CNC - Help! Dave Fisher 2004-11-29 11:53:47 UTC RE: Spindle Motor Rajasingham., A. "Indi" 2004-11-29 13:06:40 UTC RE: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC - Help! Alan Marconett 2004-11-29 13:23:10 UTC Re: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC - Help! Rajasingham., A. "Indi" 2004-11-29 13:36:45 UTC RE: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC probe- Help! gary 2004-11-29 14:11:49 UTC Re: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC - VDF Spindle Henrik Olsson 2004-11-29 14:15:25 UTC Re: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC probe- Help! Thomas Powell 2004-11-30 08:00:15 UTC Re: [CAD_CAM_EDM_DRO] RE: Rong Fu RF 45 vs RF 31 CNC probe- Help! capteod 2004-11-30 09:25:03 UTC Re: Rong Fu RF 45 vs RF 31 CNC - Help! Alan Marconett 2004-11-30 10:52:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Rong Fu RF 45 vs RF 31 CNC - Help!