CAD CAM EDM DRO - Yahoo Group Archive

Re: edm-software?

Posted by alflewerken
on 2005-01-11 12:29:16 UTC
Hi Wally,

The EDM plans do include an electronic control circuitry and also it
contains some software called "testware" wich can make some simple
cuts, but this is very rudimentary. The machine works with this
software and I can make basic cuts. But I have built this machine
for fun and learning about edm.

The next project will be to build an 4-axis wire-edm, so I'm able to
do undercuts in my workpieces. The path and axis-synchronisation
will be more sophisticated than the 2-axis one.

I have the opportunity to "play" with some agie-edm machines and it
would be fun to create some free software (e.g. gnu-license) based
on emc2.

The difficulty to use emc2 for this project would possibly the fact,
that emc has no possibility to react to the feedback (current-
measurement). Sometimes the control-software has to retract and go
some steps back on the path it came from, if a shortcut between the
wire and the workpiece is detected.

Thats the reason I have asked for some source-code snipplets.

Alf


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "cnc_4_me" <cnc4me@g...>
wrote:
>
> I suspect that you need a hardware interface between your software
> and the cutting wire...I do not think software on a pc will be
fast
> enough or smart enough to control the EDM machine....The current
in
> the wire will have to be monitored and the waveform constantly
> adjusted and the table fed...Monitoring the waveform will require
> filtering and analysis...All done in real time so wire dose not
> break...
>
> Are you saying the EDM plans do not include any electronic control
> circuitry???
>
> Wally
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "alflewerken"
<lewerken@t...>
> wrote:
> >
> > Hi all,
> >
> > I have built an wire-edm-machine from the plans available from
the
> > http://www.seanet.com/~dmauch/Products2.htm website.
> >
> > Now I need some control-software to control this machine. My
Idea
> > was to write an kinematics-module for the emc2, but before I
begin
> > to program I am wondering, if someone knows some control-
software
> or
> > even some source-code for this purpose. Everything will be
welcome,
> > even source-code-snipplets.
> >
> > The problem is, that the control-software can't cut with an
> constant
> > feedrate through the material, but has to take the feedback from
> the
> > edm-process into account.
> >
> > Thanks for your help in advance.
> >
> > Alf Lewerken
> >
> > btw: happy new year to everyone

Discussion Thread

alflewerken 2005-01-10 12:26:27 UTC edm-software? cnc_4_me 2005-01-10 13:40:25 UTC Re: edm-software? Michael Milligan 2005-01-10 15:35:03 UTC RE: [CAD_CAM_EDM_DRO] edm-software? alflewerken 2005-01-11 12:29:16 UTC Re: edm-software? Larry 2005-01-14 15:29:59 UTC Re: edm-software? TomP 2005-01-15 17:08:14 UTC Re: [CAD_CAM_EDM_DRO] Re: edm-software?