Capacitor size? Me again
Posted by
rllalonde2000
on 2005-01-26 17:40:01 UTC
Wow, That was alot of info to absorb! Thanks to all!
I have some 15000 uf, 63volt caps. If I use two of them, that's 126
volts. Well above the 50% margin. Shouldn't this be enough?
There were several who asked how many motors and what they were rated
at and so forth. It's three 6 amp motors. I'm following the 2/3 rule.
I also have the transformer ordered. Thanks again!
Rick L.
I have some 15000 uf, 63volt caps. If I use two of them, that's 126
volts. Well above the 50% margin. Shouldn't this be enough?
There were several who asked how many motors and what they were rated
at and so forth. It's three 6 amp motors. I'm following the 2/3 rule.
I also have the transformer ordered. Thanks again!
Rick L.
Discussion Thread
rllalonde2000
2005-01-26 17:40:01 UTC
Capacitor size? Me again
Stephen Wille Padnos
2005-01-26 17:43:43 UTC
Re: [CAD_CAM_EDM_DRO] Capacitor size? Me again
rllalonde2000
2005-01-26 17:47:41 UTC
Re: Capacitor size? Me again
Mariss Freimanis
2005-01-26 18:02:20 UTC
Re: Capacitor size? Me again
Andy Wander
2005-01-26 19:40:40 UTC
RE: [CAD_CAM_EDM_DRO] Capacitor size? Me again
JanRwl@A...
2005-01-26 22:15:45 UTC
Re: [CAD_CAM_EDM_DRO] Capacitor size? Me again
JanRwl@A...
2005-01-26 22:18:55 UTC
Re: [CAD_CAM_EDM_DRO] Capacitor size? Me again
JanRwl@A...
2005-01-26 22:20:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Capacitor size? Me again
JanRwl@A...
2005-01-26 22:33:37 UTC
Re: [CAD_CAM_EDM_DRO] Capacitor size? Me again
davidhooau
2005-01-27 15:37:58 UTC
Re: Capacitor size? Me again
R Rogers
2005-01-27 18:43:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Capacitor size? Me again
turbulatordude
2005-01-27 19:04:26 UTC
Re: Capacitor size? Amperage or Current ?
turbulatordude
2005-01-27 19:07:39 UTC
Re: Capacitor size? Amperage or Current ?
Stephen Wille Padnos
2005-01-27 20:32:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Capacitor size? Me again
JanRwl@A...
2005-01-27 23:04:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Capacitor size? Me again
John Craddock
2005-01-27 23:22:59 UTC
RE: [CAD_CAM_EDM_DRO] Re: Capacitor size? Me again
John Craddock
2005-01-27 23:25:56 UTC
RE: [CAD_CAM_EDM_DRO] Re: Capacitor size? Me again