RE: [CAD_CAM_EDM_DRO] Re: looking for a 20vac transformer resource
Posted by
Jeff Dukovac
on 2005-02-20 18:52:57 UTC
Change your computer's date to the current year.
Roger Hampson <r_.hampson@...> wrote:
To get the right voltage from a transformer, if it is a open frame wind 1
(one) turn around the core and measure the voltage on this turn.
Next either add or remove turns to get the right voltage
Example if you have 0.5 volts across one turn then your turns per volt= 0.5
if you have a 20 volt transformer with 0.5 turns per volt then add 3 (three)
turns to bring the voltage up to 21.5 volts X 1.414 = 30.4 volts DC
This will work with any transformer that you can feed a wire around the core
-----Original Message-----
From: Fred Smith [mailto:imserv@...]
Sent: 20 February 2005 18:17
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: looking for a 20vac transformer resource
Roger Hampson <r_.hampson@...> wrote:
To get the right voltage from a transformer, if it is a open frame wind 1
(one) turn around the core and measure the voltage on this turn.
Next either add or remove turns to get the right voltage
Example if you have 0.5 volts across one turn then your turns per volt= 0.5
if you have a 20 volt transformer with 0.5 turns per volt then add 3 (three)
turns to bring the voltage up to 21.5 volts X 1.414 = 30.4 volts DC
This will work with any transformer that you can feed a wire around the core
-----Original Message-----
From: Fred Smith [mailto:imserv@...]
Sent: 20 February 2005 18:17
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: looking for a 20vac transformer resource
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Monte" wrote:
>
> I have a power supply that outputs 36vdc (24vac transformers)and I
> want to get down to 30vdc. A 20v transformer would get me 28vdc,
if I
> have the math right, which is close enough. Where can I get one
(or
> 2) of these. I want to drive the 4 axis Xylotex driver board and
some
> 250 oz in steppers on my Taig mill.
Monte,
IMService stocks a toroid transformer, 120/20, and also a power
supply kit with additional components to create a linear supply.
These are all new current production components that we use in our
own systems and kits.
http://www.cadcamcadcam.com/index.asp?PageAction=VIEWCATS&Category=5
bottom of the page
Fred Smith - IMService
http://www.cadcamcadcam.com/hobby
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
---------------------------------
Do you Yahoo!?
Yahoo! Search presents - Jib Jab's 'Second Term'
[Non-text portions of this message have been removed]
Discussion Thread
Monte
2005-02-19 21:01:36 UTC
looking for a 20vac transformer resource
caudlet
2005-02-19 21:47:07 UTC
Re: looking for a 20vac transformer resource
caudlet
2005-02-19 22:22:13 UTC
Re: looking for a 20vac transformer resource...more ideas
JanRwl@A...
2005-02-19 22:53:57 UTC
Re: [CAD_CAM_EDM_DRO] looking for a 20vac transformer resource
JCullins
2005-02-20 04:54:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: looking for a 20vac transformer resource
Fred Smith
2005-02-20 10:16:46 UTC
Re: looking for a 20vac transformer resource
Roger Hampson
2005-02-20 10:46:38 UTC
RE: [CAD_CAM_EDM_DRO] Re: looking for a 20vac transformer resource
Alan Marconett
2005-02-20 13:57:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: looking for a 20vac transformer resource
Bob Muse
2005-02-20 14:42:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: looking for a 20vac transformer resource
Jeff Dukovac
2005-02-20 18:52:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: looking for a 20vac transformer resource