CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Torque from Force unit

Posted by Roger Hampson
on 2005-03-05 08:48:51 UTC
Hi guys.

I have just picked up a slo-syn 230t 2A 30V translator module.

Would anyone have a datasheet on this module so that I can configure it??

I was thinking whether it could be used on my rotary table

Roger UK

-----Original Message-----
From: Imran Jawaid [mailto:av1a@...]
Sent: 05 March 2005 10:53
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: Torque from Force unit




Isn't that Kgf unit for Force?
like you can convert 3.8x9.8 = 37.2Newtons

Kgf-m or Kgf-cm is a unit of torque

Since Torque = distance x force
Then need to calculate Torque= distance x 37.2

I can be wrong as 3.8x18.877 = 71.7 (as mentioned by Dan) which is i
think pretty decend torque for small medium Milling.



Imran

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Dan Mauch" <dmauch@s...>
wrote:
> kg.cm.s to oz in multiply by 18.877 to get oz in
> Dan
> ----- Original Message -----
> From: "Imran Jawaid" <av1a@y...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Friday, March 04, 2005 10:24 AM
> Subject: [CAD_CAM_EDM_DRO] Torque from Force unit
>
>
> >
> >
> > I've an AC servo which i'm replacing with DC Servo
> >
> > the specs of AC motor says
> > WT = 3.8Kgf (which is obviously force not Torque as it is not Kgf-
m or
> > Kgf-cm)
> > Power is 300 Watts
> > How can i find the torque then ?
> >
> > Well it look really easy but in the end...
> >
> > Regards,
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a...,
> > timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
> > [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it
> > if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a
> > sister site to the CCED group, as many of the same members are
there, for
> > OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >





Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

Imran Jawaid 2005-03-04 10:26:04 UTC Torque from Force unit Dan Mauch 2005-03-04 10:56:33 UTC Re: [CAD_CAM_EDM_DRO] Torque from Force unit Imran Jawaid 2005-03-05 02:53:39 UTC Re: Torque from Force unit Roger Hampson 2005-03-05 08:48:51 UTC RE: [CAD_CAM_EDM_DRO] Re: Torque from Force unit cnc_4_me 2005-03-05 09:48:09 UTC slo-syn 230t Re: Torque from Force unit Roger Hampson 2005-03-05 12:20:54 UTC RE: [CAD_CAM_EDM_DRO] slo-syn 230t Re: Torque from Force unit cnc_4_me 2005-03-05 12:52:09 UTC slo-syn 230t Re: Torque from Force unit Roger Hampson 2005-03-05 13:24:06 UTC RE: [CAD_CAM_EDM_DRO] slo-syn 230t Re: Torque from Force unit topdown210 2005-03-05 13:49:55 UTC slo-syn 230t Re: Torque from Force unit cnc_4_me 2005-03-05 13:58:26 UTC slo-syn 230t Re: Torque from Force unit Roger Hampson 2005-03-05 14:04:49 UTC RE: [CAD_CAM_EDM_DRO] slo-syn 230t Re: Torque from Force unit cnc_4_me 2005-03-05 14:05:10 UTC slo-syn 230t Re: Torque from Force unit topdown210 2005-03-05 14:28:18 UTC slo-syn 230t Re: Torque from Force unit