RE: [CAD_CAM_EDM_DRO] slo-syn 230t Re: Torque from Force unit
Posted by
Roger Hampson
on 2005-03-05 13:24:06 UTC
Hi Wally
I only have one module
A scanner will give a large file when scanning colour if set to black /
white file size should be only a few hundred Kb, you could also zip the
files to make them even smaller
But if this is too dificult
Do you have a digital camera, or know somebody who has then you could take a
photograph of the pages on close macro
or describe the inputs to me.
Thanks
Roger
-----Original Message-----
From: cnc_4_me [mailto:cnc4me@...]
Sent: 05 March 2005 20:52
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] slo-syn 230t Re: Torque from Force unit
i can try to set up scanner..never used it...i expect large file, how
can i send to you..most email limited to 1 or 2 meg.
Wally
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Roger Hampson"
<r_.hampson@t...> wrote:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
I only have one module
A scanner will give a large file when scanning colour if set to black /
white file size should be only a few hundred Kb, you could also zip the
files to make them even smaller
But if this is too dificult
Do you have a digital camera, or know somebody who has then you could take a
photograph of the pages on close macro
or describe the inputs to me.
Thanks
Roger
-----Original Message-----
From: cnc_4_me [mailto:cnc4me@...]
Sent: 05 March 2005 20:52
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] slo-syn 230t Re: Torque from Force unit
i can try to set up scanner..never used it...i expect large file, how
can i send to you..most email limited to 1 or 2 meg.
Wally
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Roger Hampson"
<r_.hampson@t...> wrote:
> Hi Wallyinformation
>
> There is a sticker on it showing the output connections but no
> on inputis i
>
> I would like this and any wiring info to controller
>
> Any chance of a PDF copy
>
> Roger
>
>
> -----Original Message-----
> From: cnc_4_me [mailto:cnc4me@g...]
> Sent: 05 March 2005 17:48
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] slo-syn 230t Re: Torque from Force unit
>
>
>
>
> I have the full manual for it...Like 9 pages without the
> curves...What do you want to know...the drive should have a sticker
> on it with hook up info. How many of these do you have..
>
>
> Wally
>
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Roger Hampson"
> <r_.hampson@t...> wrote:
> > Hi guys.
> >
> > I have just picked up a slo-syn 230t 2A 30V translator module.
> >
> > Would anyone have a datasheet on this module so that I can
> configure it??
> >
> > I was thinking whether it could be used on my rotary table
> >
> > Roger UK
> >
> > -----Original Message-----
> > From: Imran Jawaid [mailto:av1a@y...]
> > Sent: 05 March 2005 10:53
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: [CAD_CAM_EDM_DRO] Re: Torque from Force unit
> >
> >
> >
> >
> > Isn't that Kgf unit for Force?
> > like you can convert 3.8x9.8 = 37.2Newtons
> >
> > Kgf-m or Kgf-cm is a unit of torque
> >
> > Since Torque = distance x force
> > Then need to calculate Torque= distance x 37.2
> >
> > I can be wrong as 3.8x18.877 = 71.7 (as mentioned by Dan) which
> > think pretty decend torque for small medium Milling.http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> >
> >
> > Imran
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Dan Mauch" <dmauch@s...>
> > wrote:
> > > kg.cm.s to oz in multiply by 18.877 to get oz in
> > > Dan
> > > ----- Original Message -----
> > > From: "Imran Jawaid" <av1a@y...>
> > > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > > Sent: Friday, March 04, 2005 10:24 AM
> > > Subject: [CAD_CAM_EDM_DRO] Torque from Force unit
> > >
> > >
> > > >
> > > >
> > > > I've an AC servo which i'm replacing with DC Servo
> > > >
> > > > the specs of AC motor says
> > > > WT = 3.8Kgf (which is obviously force not Torque as it is not
> Kgf-
> > m or
> > > > Kgf-cm)
> > > > Power is 300 Watts
> > > > How can i find the torque then ?
> > > >
> > > > Well it look really easy but in the end...
> > > >
> > > > Regards,
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Addresses:
> > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > >
> > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > wanliker@a...,
> > > > timg@k...
> > > > Moderator: pentam@c... indigo_red@q... davemucha@j...
> > > > [Moderators]
> > > > URL to this group:
> > > >to
> > > > OFF Topic POSTS: General Machining
> > > > If you wish to post on unlimited OT subjects goto:
> > > > aol://5863:126/rec.crafts.metalworking or go thru Google.com
> > reach itthis
> > > > if you have trouble.
> > > > http://www.metalworking.com/news_servers.html
> > > >
> > > > http://groups.yahoo.com/group/jobshophomeshop I consider
> > to be aEXCEPTIONS........
> > > > sister site to the CCED group, as many of the same members are
> > there, for
> > > > OT subjects, that are not allowed on the CCED list.
> > > >
> > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > POSTING THEM.
> > > > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> > > > billwanliker@a...,
> > > > List Mom
> > > > List Owner
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > timg@k...reach it if
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
> > [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if
> > you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to
> be a
> > sister site to the CCED group, as many of the same members are
> there, for OT
> > subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...,
> timg@k...
> Moderator: pentam@c... indigo_red@q... davemucha@j...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> you have trouble.be a
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to
> sister site to the CCED group, as many of the same members arethere, for OT
> subjects, that are not allowed on the CCED list.THEM.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........Addresses:
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
Imran Jawaid
2005-03-04 10:26:04 UTC
Torque from Force unit
Dan Mauch
2005-03-04 10:56:33 UTC
Re: [CAD_CAM_EDM_DRO] Torque from Force unit
Imran Jawaid
2005-03-05 02:53:39 UTC
Re: Torque from Force unit
Roger Hampson
2005-03-05 08:48:51 UTC
RE: [CAD_CAM_EDM_DRO] Re: Torque from Force unit
cnc_4_me
2005-03-05 09:48:09 UTC
slo-syn 230t Re: Torque from Force unit
Roger Hampson
2005-03-05 12:20:54 UTC
RE: [CAD_CAM_EDM_DRO] slo-syn 230t Re: Torque from Force unit
cnc_4_me
2005-03-05 12:52:09 UTC
slo-syn 230t Re: Torque from Force unit
Roger Hampson
2005-03-05 13:24:06 UTC
RE: [CAD_CAM_EDM_DRO] slo-syn 230t Re: Torque from Force unit
topdown210
2005-03-05 13:49:55 UTC
slo-syn 230t Re: Torque from Force unit
cnc_4_me
2005-03-05 13:58:26 UTC
slo-syn 230t Re: Torque from Force unit
Roger Hampson
2005-03-05 14:04:49 UTC
RE: [CAD_CAM_EDM_DRO] slo-syn 230t Re: Torque from Force unit
cnc_4_me
2005-03-05 14:05:10 UTC
slo-syn 230t Re: Torque from Force unit
topdown210
2005-03-05 14:28:18 UTC
slo-syn 230t Re: Torque from Force unit