Re: BANDIT controls - recommendations?
Posted by
cnc_4_me
on 2005-03-28 14:05:33 UTC
> The existing steppers work awesome, you'd think it was a servo it is2 in/sec is 120 ipm, sounds fairly fast to me. Do you find this to
> so smooth (but being steppers, the top speed maxes out at 2 inch/sec
> on each axis).
be a limiting factor?
I am still on the fence about steppers or servos, i have both motors
sitting here, could use either one. Just need to buy drivers.
Do you have experiance with both, your steppers sound like they are
working fine....
Wally
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Doug Fortune <pentam@c...>
wrote:
>It
> mpictor wrote:
> >It looks like I'm about to buy a machine with a Bandit control.
> >works, but I plan on replacing it. Can anyone give me any ideaabout
> >how much would have to be replaced, if I'm to use it with EMC?supply
> >
> >I.e. are the drives any good? are the motors any good? power
> >reliable? ... etc.sized
>
> My cnc SuperMax mill came with a Bandit control, driving nema42
> 1100 oz*in steppers on 5 TPI ballscrews.controller
>
> The Bandit power supply put out 40VDC, I scrapped the whole
> (anyone want to buy it?), and went with Gecko G201's and my own72VDC
> 14 amp power supply.
>
> The existing steppers work awesome, you'd think it was a servo it is
> so smooth (but being steppers, the top speed maxes out at 2 inch/sec
> on each axis).
>
> cheers
> Doug Fortune
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> .
Discussion Thread
mpictor
2005-03-27 19:05:19 UTC
BANDIT controls - recommendations?
R Rogers
2005-03-27 19:50:08 UTC
Re: [CAD_CAM_EDM_DRO] BANDIT controls - recommendations?
Jon Elson
2005-03-27 21:39:34 UTC
Re: [CAD_CAM_EDM_DRO] BANDIT controls - recommendations?
Doug Fortune
2005-03-28 07:41:26 UTC
Re: BANDIT controls - recommendations?
mpictor
2005-03-28 10:32:51 UTC
Re: BANDIT controls - recommendations?
David A. Frantz
2005-03-28 13:18:25 UTC
Re: [CAD_CAM_EDM_DRO] BANDIT controls - recommendations?
cnc_4_me
2005-03-28 14:05:33 UTC
Re: BANDIT controls - recommendations?
R Rogers
2005-03-28 14:30:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: BANDIT controls - recommendations?
Doug Fortune
2005-03-28 17:15:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: BANDIT controls - recommendations?